Unsolved

This post is more than 5 years old

2 Posts

63412

February 3rd, 2016 00:00

U2414H audio out

Hey

Just got my new display and I have audio out/usb issues.

I'm trying to connect usb powered speakers to the display:

Havibg both the audio cable abd usb cable produce a hissing sound.

This sound is not present when either is connected to another device (meaning different power source display as audio or display as power and different audio).

ALSO the following setup also produces much leas hiss; speaker power AND audio fron display but another random USB devices is connected and turned on.

Just to note: I've tried all 4 usb sockets all the same.

Your assistance is appreciated.

Community Manager

 • 

56.9K Posts

 • 

232.1K Points

February 3rd, 2016 05:00

For power, the USB end of the speakers should be plugged into the back rear (not bottom) USB downstream port. The audio cable then plugs into the bottom audio line out port. The monitor USB upstream cable is then connected to the computer USB port. The computer volume control should be no higher than 50%. Then raise lower the volume via the speaker volume knob.

No Events found!

Top