Unsolved
1 Rookie
•
3 Posts
0
18
U2723QE, U2717D, Mac Pro M3, daisy chain not working
I'm unable to figure out how to do it.
When I dry to daisy chain them both screen enter black screen mode, and I had to unplug the QE monitor from power to make it work again.
I used a dp cable from U2723QE -> U2717D.
I'm using mac pro m3
Is there another way?
Chino de Oro
5 Practitioner
5 Practitioner
•
4.7K Posts
0
April 17th, 2024 09:41
Verify your setup for proper ports connection.
Thunderbolt from Mac Pro M3 => USB-C port #5 of U2723QE
U2723QE displayport-out #6 => U2717D. displayport-in
Ports view for U2723QE
xtr
1 Rookie
1 Rookie
•
3 Posts
0
April 17th, 2024 13:37
Tnx @Chino de Oro .
I Already tried it and both screen went dark.
This time I also unplugged the QE from the power and connected it back.
Then the other screen asked to lower the resolution to 2560x1440 - but the main screen was already set on this resolution...
Once I lowered it to HD res it mirrored the main (QE) screen even though in the settings it set to extend.
1. how to to make it extend?
2. how to keep 2k resolution?
xtr
1 Rookie
1 Rookie
•
3 Posts
0
April 25th, 2024 07:45
Hi, I'de appreciate any help here