Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

Anil_Ghatikar

9 Posts

48532

May 19th, 2009 08:00

User and Instllation Manual for SP2008WFP

Hi,

 

I got a monitor ( 20" SP2008WFP)  from one of my business partners but he does not have user and installation manual.

The website link does not seem to work ( clicking on download leads to error page) . Tries both UK and US support pages

http://support.euro.dell.com/support/edocs/monitors/2008WFP/en%5Cindex.htm

 

Anybody got a  CD or soft copy lying around??.

I Got the webcam and monitor working. I am interested in getting the speakers to work.

 

Anil

 

 

jjon90

2 Intern

 • 

452 Posts

May 19th, 2009 09:00

Try HERE

speedstep

11 Legend

 • 

47K Posts

May 19th, 2009 13:00

 

http://support.dell.com/support/edocs/monitors/2008WFP/

User's Guide  View Download (HTML, 2.52 MB)

http://support.dell.com/support/edocs/monitors/2008WFP/en/ug/ug_en.zip

Setup Diagram View Download (PDF, 784 KB)
http://support.dell.com/support/edocs/monitors/2008WFP/multlang/west/qsg_west.pdf
http://support.dell.com/support/edocs/monitors/2008WFP/multlang/west/qsg_west.zip

Click View to access the document.

or

Click Download to save the document to your hard drive.

  1. Click Download.
     
  2. In the File Download, window, click Save.
     
  3. In the Save As window, click the Save in: drop-down arrow and select a directory on your computer's C: drive.
     
  4. Click Save.
     
  5. In the Download Complete window, click Close.

To unzip your downloaded file:

  1. Navigate to the directory location on your C: drive that you specified when you saved the file.
     
  2. Double-click the .zip file you downloaded.
     
  3. In the .zip file window, click Extract.
     
  4. In the Extract window, select the directory where you downloaded the file.
     
  5. Click Extract.
     
  6. Close the .zip file window.

 

COMMON SYMPTOMS

WHAT YOU EXPERIENCE

POSSIBLE SOLUTIONS
No Sound No power to Soundbar - the power indicator is off.
(built-in DC power supply. i.e. SP2008WFP )
  • Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the power indicator (blue LED) on the front of the Soundbar is illuminated.
  • Confirm that the power cable from the Soundbar is plugged into the monitor.
  • Confirm that the monitor has power.
  • If the monitor has no power, see Troubleshooting your monitor for monitor common problem.
No Sound Soundbar has power - power indicator is on.
  • Plug the audio line-in cable into the computer's audio out jack.
  • Set all Windows volume controls to their maximum.
  • Play some audio content on the computer (i.e. audio CD, or MP3).
  • Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
  • Clean and reseat the audio line-in plug.
  • Test the Soundbar using another audio source (i.e. portable CD player).
Distorted Sound Computer's sound card is used as the audio source.
  • Clear any obstructions between the Soundbar and the user.
  • Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
  • Set all Windows volume controls to their midpoints.
  • Decrease the volume of the audio application.
  • Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
  • Clean and reseat the audio line-in plug.
  • Troubleshoot the computer's sound card.
  • Test the Soundbar using another audio source (i.e. portable CD player).
Distorted Sound Other audio source is used.
  • Clear any obstructions between the Soundbar and the user.
  • Confirm that the audio line-in plug is completely inserted into the jack of the audio source.
  • Decrease the volume of the audio source.
  • Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
  • Clean and reseat the audio line-in plug.
Unbalanced Sound Output Sound from only one side of Soundbar.
  • Clear any obstructions between the Soundbar and the user.
  • Confirm that the audio line-in plug is completely inserted into the jack of the sound card or audio source.
  • Set all Windows audio balance controls (L-R) to their midpoints.
  • Clean and reseat the audio line-in plug.
  • Troubleshoot the computer's sound card.
  • Test the Soundbar using another audio source (i.e. portable CD player).
Low Volume Volume is too low.
  • Clear any obstructions between the Soundbar and the user.
  • Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.
  • Set all Windows volume controls to their maximum.
  • Increase the volume of the audio application.
  • Test the Soundbar using another audio source (i.e. portable CD player).

Was this post helpful?

View All

No Events found!

Top