Adding a Storage Node in Networker 7.3.2 problem

Question

I am having problems adding a storage node to a 7.3.2 Networker Server. I do the following. first command: changers -dv scsidev@8.7.0:Vendor , Product , Revision <4.60> 1 MT Element(s) starting at address 0 108 ST Element(s) starting at address 12288 16 IE Element(s) starting at address 8192 4 DT Element(s) starting at address 4096 Element Movement Matrix ->DT, ->IE, ->ST, ->MT MT->DT,MT->IE,MT->ST,______ ST->DT,ST->IE,ST->ST,ST->MT IE->DT,IE->IE,IE->ST,IE->MT DT->DT,DT->IE,DT->ST,DT->MT Gives me element address (4096) for the first drive, the one I want to share as my first drive for the storage node. Second command: jbedit -a -f rd=STNAMENODE:\.\Tape0 -E 4096 -j NAMELIBRARY -s NAMESERVER.domain.com Gives me the error: 'jbedit: RAP error: Could not find any storage nodes in the RAP database!' I have ten liscences for stoge nodes. I have 2 libraries with a total of 8 drives. The main server sees both libraries and there respective drives. Backups work fine to all 8 drives. Do I need more liscenses to add one more storage node, or do I have enough. Why do I get this error?

ble1 · Answer

Are you running this from backup server or storage node? Also, -s should be BACKUP_SERVER and not NAME_SERVER as in your example.

Halkema · Answer

from the backup server, and I meant BackupSERVER when I say severname.

ble1 · Answer

Strange indeed. Are you doing this as user with admin right? I know SP3 did fix additionally some issues, but I usually avoid jbedit so I didn't work much with it in SP2... You should try SP3.

Halkema · Answer

I have full admin rights.

NetWorker

Was this post helpful?