The error is this one: 39077:save: error, no matching devices for save of client `kocrostage1'; check storage nodes, devices or pools
Verify those configurations to allow kocrostage1 to save to a device. Probably you have restrictions somewhere and just need to add that client in the list of allowed clients
As stated above the resolution for the pool yields no available drives to use.
The pool this data would go to seems to be RAC11G. Verify that this is the expected pool, if not check pool settings for savegroup, client, level and saveset.
If the above pool is correct, check which drives are usable by this pool. Then check which storagenode(s) you have selected for the client kocrostage1. It is likely that the storagenode selected for the client, does not have a writable drive in the pool.
Either update the pool or the client settings to make sure the client can backup to pool RAC11G.
dpinink_silva
2 Intern
•
724 Posts
0
June 1st, 2010 05:00
Mike,
The error is this one: 39077:save: error, no matching devices for save of client `kocrostage1'; check storage nodes, devices or pools
Verify those configurations to allow kocrostage1 to save to a device. Probably you have restrictions somewhere and just need to add that client in the list of allowed clients
msswest
5 Posts
0
June 2nd, 2010 04:00
As stated above the resolution for the pool yields no available drives to use.
The pool this data would go to seems to be RAC11G. Verify that this is the expected pool, if not check pool settings for savegroup, client, level and saveset.
If the above pool is correct, check which drives are usable by this pool. Then check which storagenode(s) you have selected for the client kocrostage1. It is likely that the storagenode selected for the client, does not have a writable drive in the pool.
Either update the pool or the client settings to make sure the client can backup to pool RAC11G.
hari_prakash
22 Posts
0
June 2nd, 2010 06:00
Hi Mike,
This is due to the selection of target devices under "RAC11G" media pool.
Check for the appropriate devices & re-run the backups.
HTH.