Unsolved
This post is more than 5 years old
65 Posts
0
505
October 16th, 2006 10:00
Cluster Sun Solaris 10
Please, Help!!!
I'm configuring a virtual client to work with networker 7.3.2 for Unix Solaris.
After the creation of the client, as described in NetWorker Manual, Cluster Support, there's the following error: ¿Probe job had unrecoverable failure(s)¿
This error only happens when a group with a virtual client starts. If the group starts with the physical hosts, the error won¿t occur.
The NWServer can ping the client (physical and virtual ) and the clients (physical and virtual ) can ping the NWserver. rpcinfo -p works in both sides (client-server, server-client).
My question is: For HP-UX there¿s some information for /etc/cmcluster, but is necessary anything else for solaris 10? Where can I find this information? How NetWorker can understand that it¿s a virtual machine?
OS: SunOS 5.10 Generic_118833-18 sun4u sparc SUNW,Sun-Fire-V490 / SunCluster: 3.1.0 Revision: 2005.07.18.14.17
I'm configuring a virtual client to work with networker 7.3.2 for Unix Solaris.
After the creation of the client, as described in NetWorker Manual, Cluster Support, there's the following error: ¿Probe job had unrecoverable failure(s)¿
This error only happens when a group with a virtual client starts. If the group starts with the physical hosts, the error won¿t occur.
The NWServer can ping the client (physical and virtual ) and the clients (physical and virtual ) can ping the NWserver. rpcinfo -p works in both sides (client-server, server-client).
My question is: For HP-UX there¿s some information for /etc/cmcluster, but is necessary anything else for solaris 10? Where can I find this information? How NetWorker can understand that it¿s a virtual machine?
OS: SunOS 5.10 Generic_118833-18 sun4u sparc SUNW,Sun-Fire-V490 / SunCluster: 3.1.0 Revision: 2005.07.18.14.17
0 events found
No Events found!
ble1
4 Operator
•
14.4K Posts
0
October 16th, 2006 11:00
jonatas1
65 Posts
0
October 16th, 2006 12:00
% Cluster packages missing. Cannot configurce.
root@utic080 #
root@utic080 # lcmap.sc30
type: NSR_CLU_TYPE;
clu_type: NSR_LC_TYPE;
interface version: 1.0;
/usr/sbin/lcmap.sc30: scha_cluster_get: not found
/usr/sbin/lcmap.sc30: scha_cluster_get: not found
root@utic080 #
Running client initated job apears that: "Probe job had unrecoverable failure(s)"
ble1
4 Operator
•
14.4K Posts
0
October 16th, 2006 14:00
a) something is wrong with cluster configuration
b) something is wrong with networker.cluster script
As 3.1 cluster should be supported I would suggest to involve support on this one. Before that make sure you did follow instructions from installation guide.
jonatas1
65 Posts
0
October 17th, 2006 06:00
ble1
4 Operator
•
14.4K Posts
0
October 17th, 2006 07:00