This post is more than 5 years old
7 Posts
0
1854
July 16th, 2008 03:00
Jukebox license problem
Hi,
i had installed NetWorker 7.4sp1 on windows as Backup server and 2 HP-UX clients as client.
Also there is HP MSL4024 ultrium3 tape library on one HP-UX server.
Everything was ok until suddenly i get library disabled message.
I got message "you need jukebox license enabler" I have license server on windows and 2xautochanger 32 license.
here is oputput from jbconfig from HP-UX:
==============================================
# jbconfig
cannot connect to NSR service on pilip
39078:jbconfig: RPC error: Program not registered
If on a storage node, enter the NSR server hostname? [pilip] evabckp
using 'evabckp' as the NSR server
On a storage node, the hostname is a prefix to the jukebox name.
Enter the hostname to use as a prefix? [pilip]
Using 'pilip' as the hostname prefix
Jbconfig is running on host pilip (HP-UX B.11.11),
and is using evabckp as the NetWorker server.
1) Configure an AlphaStor Library.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 2
14484:jbconfig: Scanning SCSI buses; this may take a while ...
Installing 'Standard SCSI Jukebox' jukebox - scsidev@11.0.0.
What name do you want to assign to this jukebox device? lib1
using 'rd=pilip:lib1' as jukebox device name
15814:jbconfig: Attempting to detect serial numbers on the jukebox and drives ...
15815:jbconfig: Will try to use SCSI information returned by jukebox to configure drives.
Turn NetWorker auto-cleaning on (yes / no) [yes]?
The following drive(s) can be auto-configured in this jukebox:
1> LTO Ultrium-3 @ 11.0.1 ==> /dev/rmt/c11t0d1BESTnb
These are all the drives that this jukebox has reported.
To change the drive model(s) or configure them as shared or NDMP drives,
you need to bypass auto-configure. Bypass auto-configure? (yes / no) [no]
14421:jbconfig:
A Dedicated Storage Node can backup only local data to its devices.
Should pilip be configured as a Dedicated Storage Node? (yes / no) [no] yes
39078:jbconfig: RAP error: Cannot create device; dedicated storage node enabler required.
===================================================
i had installed NetWorker 7.4sp1 on windows as Backup server and 2 HP-UX clients as client.
Also there is HP MSL4024 ultrium3 tape library on one HP-UX server.
Everything was ok until suddenly i get library disabled message.
I got message "you need jukebox license enabler" I have license server on windows and 2xautochanger 32 license.
here is oputput from jbconfig from HP-UX:
==============================================
# jbconfig
cannot connect to NSR service on pilip
39078:jbconfig: RPC error: Program not registered
If on a storage node, enter the NSR server hostname? [pilip] evabckp
using 'evabckp' as the NSR server
On a storage node, the hostname is a prefix to the jukebox name.
Enter the hostname to use as a prefix? [pilip]
Using 'pilip' as the hostname prefix
Jbconfig is running on host pilip (HP-UX B.11.11),
and is using evabckp as the NetWorker server.
1) Configure an AlphaStor Library.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 2
14484:jbconfig: Scanning SCSI buses; this may take a while ...
Installing 'Standard SCSI Jukebox' jukebox - scsidev@11.0.0.
What name do you want to assign to this jukebox device? lib1
using 'rd=pilip:lib1' as jukebox device name
15814:jbconfig: Attempting to detect serial numbers on the jukebox and drives ...
15815:jbconfig: Will try to use SCSI information returned by jukebox to configure drives.
Turn NetWorker auto-cleaning on (yes / no) [yes]?
The following drive(s) can be auto-configured in this jukebox:
1> LTO Ultrium-3 @ 11.0.1 ==> /dev/rmt/c11t0d1BESTnb
These are all the drives that this jukebox has reported.
To change the drive model(s) or configure them as shared or NDMP drives,
you need to bypass auto-configure. Bypass auto-configure? (yes / no) [no]
14421:jbconfig:
A Dedicated Storage Node can backup only local data to its devices.
Should pilip be configured as a Dedicated Storage Node? (yes / no) [no] yes
39078:jbconfig: RAP error: Cannot create device; dedicated storage node enabler required.
===================================================
No Events found!
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 21st, 2008 01:00
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 16th, 2008 04:00
almirv
7 Posts
0
July 16th, 2008 04:00
456-004-659_R7.4 NETWORKER NETWORK ED STORAGE NODE UNIX 2 7.4
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 16th, 2008 04:00
almirv
7 Posts
0
July 21st, 2008 01:00
i have NLM server on windows mashine wich is Networker server.
I have here storage node licence:
Storage Nodes/21
this jbconfig was run from hp-ux machine which is used as client machine:
Almir
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 21st, 2008 01:00
Go to NMC configuration tab and from there locate Registrations... check there if you have storage node licenses entered.
almirv
7 Posts
0
July 21st, 2008 01:00
as you suggested I answered no for dedicated storage node and still have same error:
root@pilip:/# jbconfig
cannot connect to NSR service on pilip
39078:jbconfig: RPC error: Program not registered
If on a storage node, enter the NSR server hostname? [pilip] evabckp
using 'evabckp' as the NSR server
On a storage node, the hostname is a prefix to the jukebox name.
Enter the hostname to use as a prefix? [pilip]
Using 'pilip' as the hostname prefix
Jbconfig is running on host pilip (HP-UX B.11.11),
and is using evabckp as the NetWorker server.
1) Configure an AlphaStor Library.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 2
14484:jbconfig: Scanning SCSI buses; this may take a while ...
Installing 'Standard SCSI Jukebox' jukebox - scsidev@11.0.0.
What name do you want to assign to this jukebox device? node1
using 'rd=pilip:node1' as jukebox device name
15814:jbconfig: Attempting to detect serial numbers on the jukebox and drives ...
15815:jbconfig: Will try to use SCSI information returned by jukebox to configure drives.
Turn NetWorker auto-cleaning on (yes / no) [yes]?
The following drive(s) can be auto-configured in this jukebox:
1> LTO Ultrium-3 @ 11.0.1 ==> /dev/rmt/c11t0d1BESTnb
These are all the drives that this jukebox has reported.
To change the drive model(s) or configure them as shared or NDMP drives,
you need to bypass auto-configure. Bypass auto-configure? (yes / no) [no]
14421:jbconfig:
A Dedicated Storage Node can backup only local data to its devices.
Should pilip be configured as a Dedicated Storage Node? (yes / no) [no]
39078:jbconfig: RAP error: Cannot create device; storage node enabler required.
root@pilip:/#
almirv
7 Posts
0
July 21st, 2008 02:00
I disabled NLM and use standard licensing on the backup server.
It works fine.
Thanks