Unsolved
This post is more than 5 years old
50 Posts
0
3334
July 1st, 2014 01:00
Networker - Restore Client with exclude
Hello,
I have got a script for restore my client networker.
1- I put few tapes in my robot.
2- The script restore all clients present on my tapes
3- It's works with Windows client (NTFS) but i have an error when the script find a Unix client (maybe ext2 - ext3 - ext4) on my tapes.
(For your information, i have this error because i restore client ext2/3/4 on a filesystem NTFS)
How i can escape errors ? Can you help me for find a command for excluding UNIX client ?
Thanks for your help !
Mika_restore
0 events found
No Events found!
bingo.1
2.4K Posts
0
July 19th, 2014 02:00
The SSID already specifies the source dats (client,name,level,savetime). It is unique.
If possible login to the destination client (where the data hall be restored) and exexute the the command:
recover -iN -d destination_path -S ssid
Mika_Restore
50 Posts
0
July 25th, 2014 07:00
ble , no i specify just one SSID
bingo, i say : "I use this command recover -iN -d [destination path] -S [SSID client]"
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 28th, 2014 01:00
I assume NSR client resource is back? If not, create it with same clientid as recorded in mdb first.
Mika_Restore
50 Posts
0
July 28th, 2014 01:00
I add this information, i use this command on my serveur NW (i want restore a client deleted )
bingo.1
2.4K Posts
0
July 28th, 2014 02:00
It seems that you deleted the client resource. As Hrvje said you must re-create it first.
Also make sure that NW can resolve the hostname.
See also here: NW recover: cannot support multiple clients
Mika_Restore
50 Posts
0
July 28th, 2014 02:00
mminfo -S -r client,clientid
What a clientid ?
When i am in NW, in my tape, i can see the ssid and the client the name of saveset but clientid ?
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 28th, 2014 02:00
If you do mminfo -S -r client,clientid you will get information you can use to create client definition again.
Mika_Restore
50 Posts
0
July 28th, 2014 02:00
I not understand your answer. You say , i need to recover a configuration ?
Ok i read this post, i think it's a same issue
Mika_Restore
50 Posts
0
July 28th, 2014 03:00
Ok, i want to run this command, but i ignore what is a clientid and where i can find this info ?
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 28th, 2014 03:00
You need to run command as instructed and you will get information. Unless ssid is not part of mdb (which is not something you have said so far).
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 28th, 2014 03:00
clientid is entry which is unique to your client and if you have removed client definition you can see it via mminfo command (assuming your entry is in mdb which so far is valid assumption). You can see it via mminfo command as instructed earlier.
Mika_Restore
50 Posts
0
July 28th, 2014 05:00
Ok i found in NW the client ID, but i can't see my client, so i can't restore ?
Mika_Restore
50 Posts
0
July 28th, 2014 06:00
I think i need to use this command scaner ...
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 28th, 2014 07:00
It is not clear to me where you do not see it? If you do not see it in GUI, then create client with same name as returned by mminfo query for ssid and make sure you also use same clientid during that process. Then you can run restore.
Mika_Restore
50 Posts
0
July 28th, 2014 07:00
Thanks for your help
Yes it's not clear, excuse me, i want to explain that : in my GUI i can see few client and in propriety i see clientID (8D11215515313151484.....165854446) but my client it's not present.
and when i do that mminfo -S "SSID find in saveset by GUI" -r name of client
i have an error ( 6143:name of volume not valide )