Disable nsrauth - that will fix peer issues.

As for PS issues, send full brc log. Cannot delete snapshot may indicate you didn't sent permissions correctly for nsrsnapck when running.

This might be obvious - but how do you disable nsrauth? Is it via nsradmin then nsrla, then update auth method: disable? And how do you re-enable it?

Thanks for you response

Kosh

Yes, it is via nsradmin - example can be found on forum if you search for it. Same method can be used to enable it - but I really don't see any reason for that.

Do you have any brc log created on client?

Tried this and the following error now occurs:

savegrp: suppressed 11 lines of verbose output
brcsession(300): Error received from PowerSnap Module
Error from PowerSnap getting snapshot vendor list during discover
PbError 4: PB_RC_BUFFER_SMALL
PowerSnap error detail:
[11480] 08/24/07 12:10:36 brcsession(682): Error received from PowerSnap Module
Error from PowerSnap while preparing for snapshot.
PbError 3: PB_RC_INTERNAL_ERROR
PowerSnap error detail: Failed to prepare the snapshot of K:\MP1\DATA\rtc.mdf. reason Error while preparing for snapshot : Not Enough Resources to Create Snapshot : No Matching Device Found
Failed to prepare snapshots for backup/recovers
[11480] 08/24/07 12:10:36 brbackupsaveset(768): BRC Session failure in preparing for snapshot. Status: 0x00000003
[11480] 08/24/07 12:10:36 brbackupsaveset(239): Failed while performing snapshot prepare. Status: 0x000003eb

Any further advice on what could be causing this?

Log from client:

[10484] 08/24/07 11:49:16 Start time Fri Aug 24 11:49:16 2007
[10484] 08/24/07 11:49:16 Computer Name: COMPUTERNAME User Name: COLLAB\svc-mac-emc-nw (svc-mac-emc-nw)
[10484] 08/24/07 11:49:16 System Version: 5.2 Build 3790 Service Pack 1
[10484] 08/24/07 11:49:16 Microsoft Data Access Component(MDAC) version: 2.82.1830.0
[10484] 08/24/07 11:49:16 sqlutil.c(10272): Can't open key in the registry
[10484] 08/24/07 11:49:16 Local host has following SQL Server online:
[10484] 08/24/07 11:49:16 MSSQL server : INSTANCENAME
[10484] 08/24/07 11:49:16 MSSQL server : INSTANCENAME2
[10484] 08/24/07 11:49:16 MSSQL server : INSTANCENAME3
[10484] 08/24/07 11:49:16 MSSQL server : INSTANCENAME4
[10484] 08/24/07 11:49:16 Use Legato Networker Server : NETWORKERSERVER.com
[10484] 08/24/07 11:49:16 Legato Networker Server Version: NetWorker nw_7_3_2_jumbo.Build.11 Power Edition/565
[10484] 08/24/07 11:49:16 nsrexecd.exe Version: nw_7_3_2_jumbo.Build.11
[10484] 08/24/07 11:49:16 nsrsqlsv.exe Version: 5.0.0.185_QuickFix Supporting SQL 7.0, SQL 2000, and SQL 2005
[10484] 08/24/07 11:49:16 Command line:
[10484] 08/24/07 11:49:16 C:\Program Files\Legato\nsr\bin\nsrsqlsv.exe -A optype=pit -A snap_sessionid=1187952501 -A pit_recycle_interval=86400 -A pit_backup_pool=Powersnap -A NSR_SERVER=NETWORKERSERVER.com -A NSR_SNAP_TYPE=symm-dmx -A NSR_DATA_MOVER=STORAGENODE.com -A SYMM_SNAP_POOL=C:\\Legato\\sym-COMPUTERNAME-LCS-ALL.res -A SYMM_SNAP_TECH=BCV -A HOST_ACCESS=ALL -A NSR_CLIENT=CLIENTNAME -A NSR_PS_DEBUG_LEVEL=9 -b Powersnap -f C:\Program Files\Legato\nsr\tmp\sd00041b -g 2100-Da[10484] 08/24/07 11:49:16 SQL Connection to INSTANCENAME4 is created. SQL Server Version is 09.00.2153
[10484] 08/24/07 11:49:16 Started resource thread (Id: 6300)
[10484] 08/24/07 11:49:16 Cluster resource monitor thread running; virtual server SQL Server (LCS).
*crname: "MSSQL:rtcconfig";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_LEVEL: 9;
NSR_SAVESET_NAME: "MSSQL:rtcconfig";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;
[10484] 08/24/07 11:49:17 SQL Connection to INSTANCENAME is created. SQL Server Version is 09.00.2153
[10484] 08/24/07 11:49:17 SQL Connection to INSTANCENAME2 is created. SQL Server Version is 09.00.2153
[10484] 08/24/07 11:49:17 SQL Connection to INSTANCENAME3 is created. SQL Server Version is 09.00.2153
[10484] 08/24/07 11:49:17 SQL Connection to INSTANCENAME4 is created. SQL Server Version is 09.00.2153
[10484] 08/24/07 11:49:17 Volume Overlap detection failed.
PowerSnap rollback restore functionality may be restricted.
[10484] 08/24/07 11:49:28 Power Snap environment variables:
*crname: "MSSQL:rtcconfig";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_ID: 1187952557;
NSR_PS_DEBUG_LEVEL: 9;
NSR_PS_ROLLBACK_ON_ABORT: TRUE;
NSR_SAVESET_NAME: "MSSQL:rtcconfig";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
NSR_STRICT_SYNC: 0;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;

[10484] 08/24/07 11:57:28 MSSQL:rtcconfig: completed savetime=1187952965
[10484] 08/24/07 11:57:41 Resource monitor thread termination status: 0x0
[10484] 08/24/07 11:57:41 Completion time Fri Aug 24 11:57:41 2007

[11116] 08/24/07 11:57:45 Start time Fri Aug 24 11:57:45 2007
[11116] 08/24/07 11:57:45 Computer Name: COMPUTERNAME User Name: COLLAB\svc-mac-emc-nw (svc-mac-emc-nw)
[11116] 08/24/07 11:57:45 System Version: 5.2 Build 3790 Service Pack 1
[11116] 08/24/07 11:57:45 Microsoft Data Access Component(MDAC) version: 2.82.1830.0
[11116] 08/24/07 11:57:45 sqlutil.c(10272): Can't open key in the registry
[11116] 08/24/07 11:57:46 Error detecting SVS logon name for mukpbcc1app083c.collab.barclayscorp.com
[11116] 08/24/07 11:57:46 (sqlutil.c)10191:No active SQL Server found
[11116] 08/24/07 11:57:46 Use Legato Networker Server : NETWORKERSERVER.com
[11116] 08/24/07 11:57:46 Legato Networker Server Version: NetWorker nw_7_3_2_jumbo.Build.11 Power Edition/565
[11116] 08/24/07 11:57:46 nsrexecd.exe Version: nw_7_3_2_jumbo.Build.11
[11116] 08/24/07 11:57:46 nsrsqlsv.exe Version: 5.0.0.185_QuickFix Supporting SQL 7.0, SQL 2000, and SQL 2005
[11116] 08/24/07 11:57:46 Command line:
[11116] 08/24/07 11:57:46 C:\Program Files\Legato\nsr\bin\nsrsqlsv.exe -A optype=pit -A snap_sessionid=1187952501 -A pit_recycle_interval=86400 -A pit_backup_pool=Powersnap -A NSR_SERVER=NETWORKERSERVER.com -A NSR_SNAP_TYPE=symm-dmx -A NSR_DATA_MOVER=STORAGENODE.com -A SYMM_SNAP_POOL=C:\\Legato\\sym-COMPUTERNAME-LCS-ALL.res -A SYMM_SNAP_TECH=BCV -A HOST_ACCESS=ALL -A NSR_CLIENT=CLIENTNAME -A NSR_PS_DEBUG_LEVEL=9 -b Powersnap -f C:\Program Files\Legato\nsr\tmp\sd00041b -g 2100-Da[11116] 08/24/07 11:57:46 SQL Connection to INSTANCENAME4 is created. SQL Server Version is 09.00.2153
[11116] 08/24/07 11:57:46 Started resource thread (Id: 7692)
[11116] 08/24/07 11:57:46 Cluster resource monitor thread running; virtual server SQL Server (LCS).
*crname: "MSSQL:rtc";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_LEVEL: 9;
NSR_SAVESET_NAME: "MSSQL:rtc";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;
[11116] 08/24/07 11:57:46 Error detecting SVS logon name for mukpbcc1app083c.collab.barclayscorp.com
[11116] 08/24/07 11:57:55 Volume Overlap detection passed
[11116] 08/24/07 11:58:04 Power Snap environment variables:
*crname: "MSSQL:rtc";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_ID: 1187953075;
NSR_PS_DEBUG_LEVEL: 9;
NSR_PS_ROLLBACK_ON_ABORT: TRUE, TRUE;
NSR_SAVESET_NAME: "MSSQL:rtc";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
NSR_STRICT_SYNC: 0;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;

[11116] 08/24/07 11:59:41 brcsession(682): Error received from PowerSnap Module
Error from PowerSnap while preparing for snapshot.
PbError 3: PB_RC_INTERNAL_ERROR
PowerSnap error detail: Failed to prepare the snapshot of K:\MP1\DATA\rtc.mdf. reason Error while preparing for snapshot : Not Enough Resources to Create Snapshot : No Matching Device Found
Failed to prepare snapshots for backup/recovers

[11116] 08/24/07 11:59:41 brbackupsaveset(768): BRC Session failure in preparing for snapshot. Status: 0x00000003
[11116] 08/24/07 11:59:41 brbackupsaveset(239): Failed while performing snapshot prepare. Status: 0x000003eb
[11116] 08/24/07 12:00:07 MSSQL:rtc: failed
[11116] 08/24/07 12:00:16 Resource monitor thread termination status: 0x0
[11116] 08/24/07 12:00:16 Completion time Fri Aug 24 12:00:16 2007

[10848] 08/24/07 12:01:22 Start time Fri Aug 24 12:01:22 2007
[10848] 08/24/07 12:01:22 Computer Name: COMPUTERNAME User Name: COLLAB\svc-mac-emc-nw (svc-mac-emc-nw)
[10848] 08/24/07 12:01:22 System Version: 5.2 Build 3790 Service Pack 1
[10848] 08/24/07 12:01:22 Microsoft Data Access Component(MDAC) version: 2.82.1830.0
[10848] 08/24/07 12:01:22 sqlutil.c(10272): Can't open key in the registry
[10848] 08/24/07 12:01:22 Local host has following SQL Server online:
[10848] 08/24/07 12:01:22 MSSQL server : INSTANCENAME
[10848] 08/24/07 12:01:22 MSSQL server : INSTANCENAME2
[10848] 08/24/07 12:01:22 MSSQL server : INSTANCENAME3
[10848] 08/24/07 12:01:22 MSSQL server : INSTANCENAME4
[10848] 08/24/07 12:01:23 Use Legato Networker Server : NETWORKERSERVER.com
[10848] 08/24/07 12:01:23 Legato Networker Server Version: NetWorker nw_7_3_2_jumbo.Build.11 Power Edition/565
[10848] 08/24/07 12:01:23 nsrexecd.exe Version: nw_7_3_2_jumbo.Build.11
[10848] 08/24/07 12:01:23 nsrsqlsv.exe Version: 5.0.0.185_QuickFix Supporting SQL 7.0, SQL 2000, and SQL 2005
[10848] 08/24/07 12:01:23 Command line:
[10848] 08/24/07 12:01:23 C:\Program Files\Legato\nsr\bin\nsrsqlsv.exe -A optype=pit -A snap_sessionid=1187952501 -A pit_recycle_interval=86400 -A pit_backup_pool=Powersnap -A NSR_SERVER=NETWORKERSERVER.com -A NSR_SNAP_TYPE=symm-dmx -A NSR_DATA_MOVER=STORAGENODE.com -A SYMM_SNAP_POOL=C:\\Legato\\sym-COMPUTERNAME-LCS-ALL.res -A SYMM_SNAP_TECH=BCV -A HOST_ACCESS=ALL -A NSR_CLIENT=CLIENTNAME -A NSR_PS_DEBUG_LEVEL=9 -b Powersnap -f C:\Program Files\Legato\nsr\tmp\sd00041c -g 2100-Da[10848] 08/24/07 12:01:23 SQL Connection to INSTANCENAME4 is created. SQL Server Version is 09.00.2153
[10848] 08/24/07 12:01:23 Started resource thread (Id: 6320)
[10848] 08/24/07 12:01:23 Cluster resource monitor thread running; virtual server SQL Server (LCS).
*crname: "MSSQL:rtc";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_LEVEL: 9;
NSR_SAVESET_NAME: "MSSQL:rtc";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;
[10848] 08/24/07 12:01:23 SQL Connection to INSTANCENAME is created. SQL Server Version is 09.00.2153
[10848] 08/24/07 12:01:24 SQL Connection to INSTANCENAME2 is created. SQL Server Version is 09.00.2153
[10848] 08/24/07 12:01:24 SQL Connection to INSTANCENAME3 is created. SQL Server Version is 09.00.2153
[10848] 08/24/07 12:01:24 SQL Connection to INSTANCENAME4 is created. SQL Server Version is 09.00.2153
[10848] 08/24/07 12:01:24 Volume Overlap detection failed.
PowerSnap rollback restore functionality may be restricted.
[10848] 08/24/07 12:01:33 Power Snap environment variables:
*crname: "MSSQL:rtc";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_ID: 1187953284;
NSR_PS_DEBUG_LEVEL: 9;
NSR_PS_ROLLBACK_ON_ABORT: TRUE;
NSR_SAVESET_NAME: "MSSQL:rtc";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
NSR_STRICT_SYNC: 0;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;

[10848] 08/24/07 12:03:11 brcsession(682): Error received from PowerSnap Module
Error from PowerSnap while preparing for snapshot.
PbError 3: PB_RC_INTERNAL_ERROR
PowerSnap error detail: Failed to prepare the snapshot of K:\MP1\DATA\rtc.mdf. reason Error while preparing for snapshot : Not Enough Resources to Create Snapshot : No Matching Device Found
Failed to prepare snapshots for backup/recovers

[10848] 08/24/07 12:03:11 brbackupsaveset(768): BRC Session failure in preparing for snapshot. Status: 0x00000003
[10848] 08/24/07 12:03:11 brbackupsaveset(239): Failed while performing snapshot prepare. Status: 0x000003eb
[10848] 08/24/07 12:03:37 MSSQL:rtc: failed
[10848] 08/24/07 12:03:48 Resource monitor thread termination status: 0x0
[10848] 08/24/07 12:03:48 Completion time Fri Aug 24 12:03:48 2007

[11324] 08/24/07 12:04:56 Start time Fri Aug 24 12:04:56 2007
[11324] 08/24/07 12:04:56 Computer Name: COMPUTERNAME User Name: COLLAB\svc-mac-emc-nw (svc-mac-emc-nw)
[11324] 08/24/07 12:04:56 System Version: 5.2 Build 3790 Service Pack 1
[11324] 08/24/07 12:04:56 Microsoft Data Access Component(MDAC) version: 2.82.1830.0
[11324] 08/24/07 12:04:56 sqlutil.c(10272): Can't open key in the registry
[11324] 08/24/07 12:04:56 Error detecting SVS logon name for mukpbcc1app083c.collab.barclayscorp.com
[11324] 08/24/07 12:04:56 (sqlutil.c)10191:No active SQL Server found
[11324] 08/24/07 12:04:56 Use Legato Networker Server : NETWORKERSERVER.com
[11324] 08/24/07 12:04:56 Legato Networker Server Version: NetWorker nw_7_3_2_jumbo.Build.11 Power Edition/565
[11324] 08/24/07 12:04:56 nsrexecd.exe Version: nw_7_3_2_jumbo.Build.11
[11324] 08/24/07 12:04:56 nsrsqlsv.exe Version: 5.0.0.185_QuickFix Supporting SQL 7.0, SQL 2000, and SQL 2005
[11324] 08/24/07 12:04:56 Command line:
[11324] 08/24/07 12:04:56 C:\Program Files\Legato\nsr\bin\nsrsqlsv.exe -A optype=pit -A snap_sessionid=1187952501 -A pit_recycle_interval=86400 -A pit_backup_pool=Powersnap -A NSR_SERVER=NETWORKERSERVER.com -A NSR_SNAP_TYPE=symm-dmx -A NSR_DATA_MOVER=STORAGENODE.com -A SYMM_SNAP_POOL=C:\\Legato\\sym-COMPUTERNAME-LCS-ALL.res -A SYMM_SNAP_TECH=BCV -A HOST_ACCESS=ALL -A NSR_CLIENT=CLIENTNAME -A NSR_PS_DEBUG_LEVEL=9 -b Powersnap -f C:\Program Files\Legato\nsr\tmp\sd00041d -g 2100-Da[11324] 08/24/07 12:04:56 SQL Connection to INSTANCENAME4 is created. SQL Server Version is 09.00.2153
[11324] 08/24/07 12:04:56 Started resource thread (Id: 10312)
[11324] 08/24/07 12:04:56 Cluster resource monitor thread running; virtual server SQL Server (LCS).
*crname: "MSSQL:rtc";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_LEVEL: 9;
NSR_SAVESET_NAME: "MSSQL:rtc";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;
[11324] 08/24/07 12:04:57 Error detecting SVS logon name for mukpbcc1app083c.collab.barclayscorp.com
[11324] 08/24/07 12:05:06 Volume Overlap detection passed
[11324] 08/24/07 12:05:15 Power Snap environment variables:
*crname: "MSSQL:rtc";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_ID: 1187953506;
NSR_PS_DEBUG_LEVEL: 9;
NSR_PS_ROLLBACK_ON_ABORT: TRUE, TRUE;
NSR_SAVESET_NAME: "MSSQL:rtc";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
NSR_STRICT_SYNC: 0;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;

[11324] 08/24/07 12:06:53 brcsession(682): Error received from PowerSnap Module
Error from PowerSnap while preparing for snapshot.
PbError 3: PB_RC_INTERNAL_ERROR
PowerSnap error detail: Failed to prepare the snapshot of K:\MP1\DATA\rtc.mdf. reason Error while preparing for snapshot : Not Enough Resources to Create Snapshot : No Matching Device Found
Failed to prepare snapshots for backup/recovers

[11324] 08/24/07 12:06:53 brbackupsaveset(768): BRC Session failure in preparing for snapshot. Status: 0x00000003
[11324] 08/24/07 12:06:53 brbackupsaveset(239): Failed while performing snapshot prepare. Status: 0x000003eb
[11324] 08/24/07 12:07:19 MSSQL:rtc: failed
[11324] 08/24/07 12:07:31 Resource monitor thread termination status: 0x0
[11324] 08/24/07 12:07:31 Completion time Fri Aug 24 12:07:31 2007

[11480] 08/24/07 12:08:39 Start time Fri Aug 24 12:08:39 2007
[11480] 08/24/07 12:08:39 Computer Name: COMPUTERNAME User Name: COLLAB\svc-mac-emc-nw (svc-mac-emc-nw)
[11480] 08/24/07 12:08:39 System Version: 5.2 Build 3790 Service Pack 1
[11480] 08/24/07 12:08:39 Microsoft Data Access Component(MDAC) version: 2.82.1830.0
[11480] 08/24/07 12:08:39 sqlutil.c(10272): Can't open key in the registry
[11480] 08/24/07 12:08:40 Error detecting SVS logon name for mukpbcc1app083c.collab.barclayscorp.com
[11480] 08/24/07 12:08:40 (sqlutil.c)10191:No active SQL Server found
[11480] 08/24/07 12:08:40 Use Legato Networker Server : NETWORKERSERVER.com
[11480] 08/24/07 12:08:40 Legato Networker Server Version: NetWorker nw_7_3_2_jumbo.Build.11 Power Edition/565
[11480] 08/24/07 12:08:40 nsrexecd.exe Version: nw_7_3_2_jumbo.Build.11
[11480] 08/24/07 12:08:40 nsrsqlsv.exe Version: 5.0.0.185_QuickFix Supporting SQL 7.0, SQL 2000, and SQL 2005
[11480] 08/24/07 12:08:40 Command line:
[11480] 08/24/07 12:08:40 C:\Program Files\Legato\nsr\bin\nsrsqlsv.exe -A optype=pit -A snap_sessionid=1187952501 -A pit_recycle_interval=86400 -A pit_backup_pool=Powersnap -A NSR_SERVER=NETWORKERSERVER.com -A NSR_SNAP_TYPE=symm-dmx -A NSR_DATA_MOVER=STORAGENODE.com -A SYMM_SNAP_POOL=C:\\Legato\\sym-COMPUTERNAME-LCS-ALL.res -A SYMM_SNAP_TECH=BCV -A HOST_ACCESS=ALL -A NSR_CLIENT=CLIENTNAME -A NSR_PS_DEBUG_LEVEL=9 -b Powersnap -f C:\Program Files\Legato\nsr\tmp\sd00041e -g 2100-Da[11480] 08/24/07 12:08:40 SQL Connection to INSTANCENAME4 is created. SQL Server Version is 09.00.2153
[11480] 08/24/07 12:08:40 Started resource thread (Id: 11228)
[11480] 08/24/07 12:08:40 Cluster resource monitor thread running; virtual server SQL Server (LCS).
*crname: "MSSQL:rtc";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_LEVEL: 9;
NSR_SAVESET_NAME: "MSSQL:rtc";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;
[11480] 08/24/07 12:08:40 Error detecting SVS logon name for mukpbcc1app083c.collab.barclayscorp.com
[11480] 08/24/07 12:08:49 Volume Overlap detection passed
[11480] 08/24/07 12:08:58 Power Snap environment variables:
*crname: "MSSQL:rtc";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME,
CLIENTNAME.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 2100-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_ID: 1187953729;
NSR_PS_DEBUG_LEVEL: 9;
NSR_PS_ROLLBACK_ON_ABORT: TRUE, TRUE;
NSR_SAVESET_NAME: "MSSQL:rtc";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
NSR_STRICT_SYNC: 0;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187952501;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-LCS-ALL.res";
SYMM_SNAP_TECH: BCV;

[11480] 08/24/07 12:10:36 brcsession(682): Error received from PowerSnap Module
Error from PowerSnap while preparing for snapshot.
PbError 3: PB_RC_INTERNAL_ERROR
PowerSnap error detail: Failed to prepare the snapshot of K:\MP1\DATA\rtc.mdf. reason Error while preparing for snapshot : Not Enough Resources to Create Snapshot : No Matching Device Found
Failed to prepare snapshots for backup/recovers

[11480] 08/24/07 12:10:36 brbackupsaveset(768): BRC Session failure in preparing for snapshot. Status: 0x00000003
[11480] 08/24/07 12:10:36 brbackupsaveset(239): Failed while performing snapshot prepare. Status: 0x000003eb
[11480] 08/24/07 12:11:02 MSSQL:rtc: failed
[11480] 08/24/07 12:11:15 Resource monitor thread termination status: 0x0
[11480] 08/24/07 12:11:15 Completion time Fri Aug 24 12:11:15 2007

[5556] 08/24/07 13:00:09 Start time Fri Aug 24 13:00:09 2007
[5556] 08/24/07 13:00:09 Computer Name: COMPUTERNAME User Name: COLLAB\svc-mac-emc-nw (svc-mac-emc-nw)
[5556] 08/24/07 13:00:09 System Version: 5.2 Build 3790 Service Pack 1
[5556] 08/24/07 13:00:09 Microsoft Data Access Component(MDAC) version: 2.82.1830.0
[5556] 08/24/07 13:00:09 sqlutil.c(10272): Can't open key in the registry
[5556] 08/24/07 13:00:10 Local host has following SQL Server online:
[5556] 08/24/07 13:00:10 MSSQL server : INSTANCENAME
[5556] 08/24/07 13:00:10 MSSQL server : INSTANCENAME2
[5556] 08/24/07 13:00:10 MSSQL server : INSTANCENAME3
[5556] 08/24/07 13:00:10 MSSQL server : INSTANCENAME4
[5556] 08/24/07 13:00:10 Use Legato Networker Server : NETWORKERSERVER.com
[5556] 08/24/07 13:00:10 Legato Networker Server Version: NetWorker nw_7_3_2_jumbo.Build.11 Power Edition/565
[5556] 08/24/07 13:00:10 nsrexecd.exe Version: nw_7_3_2_jumbo.Build.11
[5556] 08/24/07 13:00:10 nsrsqlsv.exe Version: 5.0.0.185_QuickFix Supporting SQL 7.0, SQL 2000, and SQL 2005
[5556] 08/24/07 13:00:10 Command line:
[5556] 08/24/07 13:00:10 C:\Program Files\Legato\nsr\bin\nsrsqlsv.exe -A optype=pit -A snap_sessionid=1187956808 -A pit_recycle_interval=86400 -A pit_backup_pool=Powersnap -A NSR_SERVER=NETWORKERSERVER.com -A NSR_SNAP_TYPE=symm-dmx -A NSR_DATA_MOVER=STORAGENODE.com -A SYMM_SNAP_POOL=C:\\Legato\\sym-COMPUTERNAME-mommac-all.res -A SYMM_SNAP_TECH=BCV -A HOST_ACCESS=ALL -A NSR_CLIENT=CLIENTNAME2 -A NSR_PS_DEBUG_LEVEL=9 -b Powersnap -f C:\Program Files\Legato\nsr\tmp\sd00041f -g 1300[5556] 08/24/07 13:00:10 SQL Connection to INSTANCENAME2 is created. SQL Server Version is 09.00.2153
[5556] 08/24/07 13:00:11 Started resource thread (Id: 10676)
[5556] 08/24/07 13:00:11 Cluster resource monitor thread running; virtual server SQL Server (MOMMAC).
*crname: "MSSQL:OnePoint";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME2,
CLIENTNAME2.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 1300-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_LEVEL: 9;
NSR_SAVESET_NAME: "MSSQL:OnePoint";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187956808;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-mommac-all.res";
SYMM_SNAP_TECH: BCV;
[5556] 08/24/07 13:00:11 SQL Connection to INSTANCENAME is created. SQL Server Version is 09.00.2153
[5556] 08/24/07 13:00:12 SQL Connection to INSTANCENAME2 is created. SQL Server Version is 09.00.2153
[5556] 08/24/07 13:00:12 SQL Connection to INSTANCENAME3 is created. SQL Server Version is 09.00.2153
[5556] 08/24/07 13:00:12 SQL Connection to INSTANCENAME4 is created. SQL Server Version is 09.00.2153
[5556] 08/24/07 13:03:56 Volume Overlap detection passed
[5556] 08/24/07 13:04:05 Power Snap environment variables:
*crname: "MSSQL:OnePoint";
HOST_ACCESS: ALL;
NSR_BACKUP_LEVEL: full;
NSR_CLIENT: CLIENTNAME2,
CLIENTNAME2.collab.barclayscorp.com;
NSR_DATA_MOVER: STORAGENODE.com;
NSR_DATA_VOLUME_POOL: Powersnap;
NSR_GROUP: 1300-Data-PS-SQL;
NSR_LOG_VOLUME_POOL: Powersnap;
NSR_PS_DEBUG_ID: 1187957036;
NSR_PS_DEBUG_LEVEL: 9;
NSR_PS_ROLLBACK_ON_ABORT: TRUE, TRUE;
NSR_SAVESET_NAME: "MSSQL:OnePoint";
NSR_SERVER: NETWORKERSERVER.com,
NETWORKERSERVER.com;
NSR_SNAP_TYPE: symm-dmx;
NSR_STRICT_SYNC: 0;
optype: pit;
pit_backup_pool: Powersnap;
pit_recycle_interval: 86400;
snap_sessionid: 1187956808;
SYMM_SNAP_POOL: \
"C:\\\\Legato\\\\sym-COMPUTERNAME-mommac-all.res";
SYMM_SNAP_TECH: BCV;

[5556] 08/24/07 13:08:34 MSSQL:OnePoint: completed savetime=1187957238
[5556] 08/24/07 13:08:46 Resource monitor thread termination status: 0x0
[5556] 08/24/07 13:08:46 Completion time Fri Aug 24 13:08:46 2007

I've had to remove the names, but these are the errors rec'd during snap/backup

Don't worry about names, I understand some banks have this strange policy.

Error that I see is that there seems to be an problem when it comes to STD-BCV relation for K:\MP1\DATA\rtc.mdf. You get not enough resources which either means that STD covering that disk doesn't have corresponding BCV associated (check those with symdg command) OR (and perhaps AND) you have retained snap which is not yet released and can't be reused for your next snap session.