This post is more than 5 years old
2 Intern
•
360 Posts
0
4855
January 16th, 2009 02:00
recover error
Dear All,
[root@chcsmail log]# recover
Warning: could not establish job id with jobd. Continuing on.
必須是區塊裝置 (Block device)
Could not connect to server.
recover: Cannot start session with server chcsmail.open2u.com.tw: RPC cannot make a procedure call: Create failed: Program not registered
Does anybody give me any input?
Thank you,
Dennis Dai
[root@chcsmail log]# recover
Warning: could not establish job id with jobd. Continuing on.
必須是區塊裝置 (Block device)
Could not connect to server.
recover: Cannot start session with server chcsmail.open2u.com.tw: RPC cannot make a procedure call: Create failed: Program not registered
Does anybody give me any input?
Thank you,
Dennis Dai
No Events found!
Jiju1
181 Posts
0
January 19th, 2009 02:00
First Check the nsr is running , If it is already running , try nwrecover -s . If you got the recover windows , means that you can contact witht the serve . Then check the /nsr/res/servers .
Rajesh
salvoemc
45 Posts
1
January 16th, 2009 03:00
Try first with nsrports -s networker_server after this try with rpcinfo -p networker_server and rpcinfo -p localhost
Last action, try with recover -s networker_server
sarpydog
2 Intern
•
360 Posts
0
January 19th, 2009 22:00
We tried networker client version 7.2, 7.3 and 7.4.
Final we use 7.4.4 version and the problem was gone.
Thank you for your help.
Dennis Dai