Jbconfig is running on host server10-1rd.fplus.local (Windows Server 2003 5.2), and is using server10-1rd.fplus.local as the NetWorker server.
1) Configure an AlphaStor Library. 2) Configure an Autodetected SCSI Jukebox. 3) Configure an Autodetected NDMP SCSI Jukebox. 4) Configure an SJI Jukebox. 5) Configure an STL Silo. 6) Configure a Microsoft Removable Storage Jukebox.
What kind of Jukebox are you configuring? [1] 2 14484:jbconfig: Scanning SCSI buses; this may take a while ... 14486:jbconfig: There appear to be no SCSI jukeboxes connected to this system. This could mean the SCSI jukebox(es) are not connected to the system, cannot be seen (pending a reboot) or have already been configured. 14487:jbconfig: On Windows Systems, this could mean that the SCSI jukebox(es) ar e enabled for Microsoft Removable Storage. 14488:jbconfig: Please rerun the program after making the necessary changes.
I have tried with reboot of server. The problem is that I have deleted library, and from then all server could not see the jukebox, even in Devica Manager all of them could not see the autochanger, there is no second tape drive and jukebox icon there as well. Nothing else have been changed. The problem how I see it, is that might be with Windows Operating System. Otherwise why all of them stop working immediately I deleted that library, I mean why all of them including networker could not see jukebox?
It does not have to take anything with license. The inquire output shows two drives which means only the autochanger is not visible. You can try with a reboot of the server. It may work.
Deleting from NetWorker does not affect the OS. There is something wrong between OS and library connectivity. Check the cabling between library and networker. I expect there is connectivity problem between the two.
It is not even in any of Device Managers. The very moment the library was deleted on Networker Server, it has disappeared on DriverManager as well. I do not know why it is not visable to OS. The jukebox is ADIC Scalar 24 310A/Autocharger.
I was told that something has to be done, to be visable. It looks like hardware problem and that is not visable. Maybe licence?
In the output of the inquire there is no autochanger shown. This happens when the jukebox is not visible to the OS. Check the device manager. I expect there also autochannger will not be there. First you need to make sure that library is visible at OS level then only you can configure it in NetWorker.
Corerect FC Switch and Autochanger connection. By the way is there some equipment to test FC connectors on the market? In this case it was tranceiver in FC switch.
pereubu
86 Posts
0
November 23rd, 2009 07:00
It is not, and that might be the problem.
C:\Documents and Settings\Administrator>inquire
scsidev@0.0.0:DGC RAID 5 0326|Disk, \\.\PHYSICALDRIVE0
S/N: CK200071900247
WWNN=xxxxxxxxxxx
PORT=00000001
scsidev@0.1.0:DGC RAID 5 0326|Disk
scsidev@0.2.0:DGC RAID 5 0326|Disk
scsidev@0.3.0:DGC RAID 5 0326|Disk
scsidev@0.4.0:IBM ULTRIUM-TD3 64D0|Tape, \\.\Tape0
S/N: 1210266394
ATNN=IBM ULTRIUM-TD3 12102663
94
WWNN=xxxxxxxxx
WWPN=xxxxxxxx
PORT=00000001
scsidev@4.0.0:DGC RAID 5 0326|Disk
scsidev@4.1.0:DGC RAID 5 0326|Disk
scsidev@4.2.0:DGC RAID 5 0326|Disk
scsidev@4.3.0:DGC RAID 5 0326|Disk
C:\Documents and Settings\Administrator>inquire
scsidev@0.0.0:DGC RAID 5 0326|Disk, \\.\PHYSICALDRIVE0
S/N: CK200071900247
WWNN=556666
PORT=00000001
scsidev@0.1.0:DGC RAID 5 0326|Disk
scsidev@0.2.0:DGC RAID 5 0326|Disk
scsidev@0.3.0:DGC RAID 5 0326|Disk
scsidev@0.4.0:IBM ULTRIUM-TD3 64D0|Tape, \\.\Tape0
S/N: 1210266394
ATNN=IBM ULTRIUM-TD3 12102663
94
WWNN=xxxxxxxx
WWPN=xxxxxxxx
PORT=00000001
scsidev@4.0.0:DGC RAID 5 0326|Disk
scsidev@4.1.0:DGC RAID 5 0326|Disk
scsidev@4.2.0:DGC RAID 5 0326|Disk
scsidev@4.3.0:DGC RAID 5 0326|Disk
HCLBACKUP
2 Intern
•
150 Posts
0
November 23rd, 2009 07:00
pereubu
86 Posts
0
November 23rd, 2009 08:00
Neither jbconfig gives solution:
C:\Documents and Settings\Administrator>jbconfig
Jbconfig is running on host server10-1rd.fplus.local (Windows Server 2003 5.2),
and is using server10-1rd.fplus.local as the NetWorker server.
1) Configure an AlphaStor Library.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
6) Configure a Microsoft Removable Storage Jukebox.
What kind of Jukebox are you configuring? [1] 2
14484:jbconfig: Scanning SCSI buses; this may take a while ...
14486:jbconfig:
There appear to be no SCSI jukeboxes connected to this system.
This could mean the SCSI jukebox(es) are not connected to the system,
cannot be seen (pending a reboot) or have already been configured.
14487:jbconfig: On Windows Systems, this could mean that the SCSI jukebox(es) ar
e
enabled for Microsoft Removable Storage.
14488:jbconfig:
Please rerun the program after making the necessary changes.
pereubu
86 Posts
0
November 23rd, 2009 08:00
HCLBACKUP
2 Intern
•
150 Posts
0
November 23rd, 2009 08:00
It does not have to take anything with license. The inquire output shows two drives which means only the autochanger is not visible. You can try with a reboot of the server. It may work.
HCLBACKUP
2 Intern
•
150 Posts
1
November 23rd, 2009 08:00
pereubu
86 Posts
0
November 23rd, 2009 08:00
It is not even in any of Device Managers. The very moment the library was deleted on Networker Server, it has disappeared on DriverManager as well. I do not know why it is not visable to OS. The jukebox is ADIC Scalar 24 310A/Autocharger.
I was told that something has to be done, to be visable. It looks like hardware problem and that is not visable. Maybe licence?
HCLBACKUP
2 Intern
•
150 Posts
0
November 23rd, 2009 08:00
In the output of the inquire there is no autochanger shown. This happens when the jukebox is not visible to the OS. Check the device manager. I expect there also autochannger will not be there. First you need to make sure that library is visible at OS level then only you can configure it in NetWorker.
pereubu
86 Posts
0
November 30th, 2009 04:00
HCLBACKUP
2 Intern
•
150 Posts
0
November 30th, 2009 04:00