4 Operator

 • 

14.4K Posts

June 30th, 2006 02:00

From what I see you have I/O error on. Could few things - I would start from system logs for more details if available.

Also, your version of NetWorker is no longer supported - consider upgrade.

185 Posts

June 30th, 2006 03:00

This is a log from system

IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
E1D8D4A4 0627202006 P H rmt3 TAPE DRIVE FAILURE
E1D8D4A4 0627201906 P H rmt3 TAPE DRIVE FAILURE
E1D8D4A4 0627200206 P H rmt2 TAPE DRIVE FAILURE
E1D8D4A4 0627200206 P H rmt3 TAPE DRIVE FAILURE
E1D8D4A4 0627175606 P H rmt3 TAPE DRIVE FAILURE
B6048838 0627174506 P S SYSPROC SOFTWARE PROGRAM ABNORMALLY TERMINATED
E1D8D4A4 0627161806 P H rmt2 TAPE DRIVE FAILURE
E1D8D4A4 0627161706 P H rmt2 TAPE DRIVE FAILURE
E1D8D4A4 0627160806 P H rmt3 TAPE DRIVE FAILURE
E1D8D4A4 0627160706 P H rmt2 TAPE DRIVE FAILURE
E1D8D4A4 0627160606 P H rmt3 TAPE DRIVE FAILURE
E1D8D4A4 0627160506 P H rmt2 TAPE DRIVE FAILURE
E1D8D4A4 0627160506 P H rmt3 TAPE DRIVE FAILURE
E1D8D4A4 0627160406 P H rmt3 TAPE DRIVE FAILURE
E1D8D4A4 0627160406 P H rmt2 TAPE DRIVE FAILURE
45C7A35B 0627143006 P S SYSPROC SOFTWARE PROGRAM ABNORMALLY TERMINATED
45C7A35B 0627143006 P S SYSPROC SOFTWARE PROGRAM ABNORMALLY TERMINATED
45C7A35B 0627142906 P S SYSPROC SOFTWARE PROGRAM ABNORMALLY TERMINATED
----------------------------------------------------------------------------------------------------------------------

that log will appear when I start backup group on bgcfc client.
But If I start with another client this log not display.
Which I has to change the tape drive on rmt3.1 but still same error.

For the physical drive of rd=bgcfc:/dev/rmt3.1 is /dev/rmt3.1 can backup sucessedfull on backup server and another client.

Thank
Suwan

4 Operator

 • 

14.4K Posts

June 30th, 2006 03:00

Errors indicating tape drive failure do not come just with no reason so I would suggest you involve your support on this matter. Could be controller card if rmt2 and rmt3 are sharing same controller.

11 Posts

July 4th, 2006 01:00

Those kind of errors are normally down to some kind of failure - check that thoroughly and see if you can find source of failure.

185 Posts

July 13th, 2006 19:00

Do you can tell about the methode or step to checking on the system AIX?.
Because I don't know command on AIX.

Thank.
Suwan

4 Operator

 • 

14.4K Posts

July 14th, 2006 01:00

You should leave this to AIX admin then - or you could try to check one of existing rosetta stones for UNIX to help you out.

185 Posts

July 18th, 2006 23:00

Thank all.

Suwan
No Events found!

Top