Unsolved
This post is more than 5 years old
7 Posts
0
338
November 16th, 2006 06:00
Wrong tape assignment in dedicated storage node after after OS-Upgrade
Hello all,
After upgrading the OS from W2k to W2k3 on a dedicated Storage Node, the Tape assignments are wrong.
The Effect is that the storage Node makes a mount request and Networker sticks the Tape
in the wrong device. I/O Error and Device Empty is the Message comming back.
Is there any other way beside jbedit to fix that problem ? any Ideas?
Thanks!
After upgrading the OS from W2k to W2k3 on a dedicated Storage Node, the Tape assignments are wrong.
The Effect is that the storage Node makes a mount request and Networker sticks the Tape
in the wrong device. I/O Error and Device Empty is the Message comming back.
Is there any other way beside jbedit to fix that problem ? any Ideas?
Thanks!
0 events found
No Events found!
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
November 16th, 2006 07:00
http://searchstorage.techtarget.com/ateQuestionNResponse/0,289625,sid5_cid605061_tax298640,00.html
However you will still see the problem if you replace drives and I think that issue is still not resolved. Nevertheless, I'm still puzzled why would that change after upgrade (unless HBA drivers change as well).
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
November 16th, 2006 07:00