Unsolved
This post is more than 5 years old
8 Posts
0
33511
January 10th, 2014 08:00
400 Bad Request error when trying to access web interface on 6248
For some reason I'm getting this error on my stack. I have not had issues in the past connecting to the web interface, and I have checked to make sure the settings are correct. I have tried reloading the stack but I still get the same error.
DELL-Josh Cr
Moderator
•
9.4K Posts
0
January 10th, 2014 09:00
Hi, what version is the firmware at? What browser are you using? With this being an older switch it might not like newer browsers and may not be processing the HTTP request properly.
SkuzeeII
8 Posts
0
January 13th, 2014 06:00
I'm on version 3.3.7.2
I've used Chrome, IE11, IE10, and IE7 in compatibility mode.
DELL-Josh Cr
Moderator
•
9.4K Posts
0
January 13th, 2014 07:00
Try updating the firmware, at the very least it should reflash the web server. http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/powerconnect-6224?driverId=77XG3&osCode=NAA&fileId=3288111910&languageCode=en&categoryId=NI
DELL-Josh Cr
Moderator
•
9.4K Posts
0
January 13th, 2014 08:00
The configuration should be retained after a firmware update. Here is the CLI guide ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-6248_Reference%20Guide_en-us.pdf page 578 starts the VLAN configuration.
SkuzeeII
8 Posts
0
January 13th, 2014 08:00
I have some VLAN settings I need to be able to recreate on the new firmware if the web server still doesn't work. Is there a CLI VLAN configuration guide for the 6200 series or will the switches keep their settings when I update the firmware?