Unsolved
This post is more than 5 years old
1 Rookie
•
10 Posts
0
39109
November 18th, 2004 01:00
5324 switch with no http access
Hello,
I have a 5324 switch which I am unable to access the web management on.
I have used console to add a username and password at priv 15 level.
When I open a browser to the IP address, I get prompted for credentials, but then the browser sits there until the progress bar is full, then timesout.
The switch is new, so has no other configuration information other than what the quick start guide outlines.
I'd appreciate any comments or suggestions.
Thanks
GregG1
2 Intern
•
812 Posts
0
November 18th, 2004 10:00
snowrob
2 Posts
0
December 6th, 2004 13:00
I am having the same problem here with my 5324. All settings are correct but http access fails.
Browser: Internet Explorer Version 6
OS: Windows XP with Service Pack 2, Firewall disabled.
The error on the page is:
Line: 410
Char: 1
Error: Object Expected
Code: 0
URL: http://192.168.1.2
Message Edited by snowrob on 12-06-2004 10:02 AM
Message Edited by snowrob on 12-06-2004 10:20 AM
RodU
2 Posts
0
September 10th, 2009 23:00
Has anyone found a solution to this yet? I have identical problem using IE7 and Avant, both with and without proxy. I can use https no worries. HELP!!!
bh1633
909 Posts
0
September 11th, 2009 07:00
Post your config file.
RodU
2 Posts
0
September 13th, 2009 17:00
Hopefully this is what you need.
no spanning-tree
interface ethernet g1
spanning-tree disable
exit
interface ethernet g1
spanning-tree cost 100
exit
interface vlan 1
ip address 192.168.0.90 255.255.254.0
exit
ip default-gateway 192.168.0.1
no qos
hostname FB
management access-list HTTP
permit vlan 1
exit
management access-list Web
permit ip-source 192.168.0.0 mask 255.255.254.0 service http
permit vlan 1 service http
exit
logging buffered debugging
aaa authentication login default local enable
username admin password b1e34697e5393b41f01bab5e55ca9715 level 15 encrypted
username adminru password 02177c7bbc6bbd7093fc04b5259d1b8c level 15 encrypted
snmp-server location FB
snmp-server contact RU
snmp-server community public ro view Default
snmp-server group public v1 read Default
ip https server
ip http exec-timeout 60
clock timezone 10
clock source sntp
no ip domain-lookup
bh1633
909 Posts
0
September 17th, 2009 14:00
I do not see your problem. I was able to connect via http and https.
Is it possible you have an IP address conflict? In other words is there another device on your network with IP address 192.168.0.90?