Unsolved
This post is more than 5 years old
6 Posts
0
54400
April 16th, 2014 08:00
5548 Web Gui problems?
Hey All! We have used lots of dell switches in the past with minimum problems with the web gui. We recently bought a 5548 and the web gui seems to not work so well. Is there a way to upgrade the "openmanage switch manager" ? Or is that built into the firmware? We have the latest firmware installed and erased the config to factory default. For example: The vlan web page. We can click on the (U,T) ect on our 6248 and change them. On the 5548 it looks like we cant do this from the web gui? Also half the pages take forever to load and don't come up at all sometimes.
0 events found
No Events found!
silicondt
6 Posts
0
April 16th, 2014 09:00
Firefox, Chrome, IE. They all don't work.
I even tried 2 separate switches. 5548 and a 5548P.
Same thing on both. 4.1.0.10 firmware on both.
Issue 1: If you go into the vlan page. nothing happens when you click on the U, T. in tree view. You can't cycle through tagged, untagged like you can on the 6248 switches web gui.
Issue 2: If you go into vlan - > port settings - > edit. Half the time its just a black page. It never pulls up.
Issue 3: The pages are slow to load.
Keep in mind this is witha fresh config. Latest firmware. And the switch is connected directly to a laptop for testing. The laptop works just fine. I can get into 6248 and config them just fine in web gui.
Can the webgui be upgraded? Or is this part of the firmware.
silicondt
6 Posts
0
April 16th, 2014 10:00
Sorry I mean 4.1.0.15.
That is already what is on both.
silicondt
6 Posts
0
April 16th, 2014 11:00
Same thing on old versions.
CLI works fine.
mchianese
2 Posts
0
April 21st, 2014 11:00
mchianese
2 Posts
0
April 21st, 2014 14:00
If I got into vlan - > port settings - > edit, I get a blank page were the editing should be happening...