Unsolved
This post is more than 5 years old
15 Posts
0
17834
March 13th, 2008 17:00
Assign IP Address to VLAN Interface from Web Admin?
This is a simple question, I can't seem to find anwhere in the web config page to assign an ip address to a vlan interface.
Example: I create vlan 40 and want to assign ip 192.168.40.254/24 to it, I can accomplish this at the CLI with "config; interface vlan 40; ip address 192.168.40.254 255.255.255.0" but it doesn't seem to exist in the web interface!?
Thanks,
Scott
Example: I create vlan 40 and want to assign ip 192.168.40.254/24 to it, I can accomplish this at the CLI with "config; interface vlan 40; ip address 192.168.40.254 255.255.255.0" but it doesn't seem to exist in the web interface!?
Thanks,
Scott
No Events found!
Dell-Steve A
48 Posts
0
March 24th, 2008 01:00
Kirk,
Which model of switch are you using?
kirk444
15 Posts
0
March 24th, 2008 04:00
Whoops! I suppose I should have mentioned that. It's a 6224, though I can't seem to find it in my 5324 either.
Thanks,
Scott
mandzo
53 Posts
0
March 24th, 2008 14:00
firmware 2.0.0.12
Wouldn't it be under "Switching"--) "VLAN" --) "Bind IP Subnet to VLAN" ?
kirk444
15 Posts
0
March 24th, 2008 15:00
I actually answered my own question serendipitously:
Routing > IP > Interface Configuration
Dell-Steve A
48 Posts
0
March 24th, 2008 16:00
The 62xx series allows you to assign IPs to the switches, but unless it's routing, you won't have access to them. They won't respond to pings or any other type of inquiry. To assign the IP on a VLAN(not the management VLAN) for a 62xx via the web interface, go to Routing->IP->Configuration.
http://support.dell.com/support/edocs/network/PC62xx/en/UG/HTML/configue.htm#wp1173565
On the 5324, this is done under System->IP Addressing->IP Interface parameters.
mandzo
53 Posts
0
March 24th, 2008 17:00
Steve,
if I go to Routing->IP->Configuration, the "Link Speed Data Rate" shows 10M half. Does this corespond to the MAX forwarding speed of 95 pps?