Unsolved
This post is more than 5 years old
3 Posts
0
6694
July 27th, 2016 15:00
authentication failed
I tried to enable telnet login to privileged mode on a powerconnect 8132f. I did the following configurations:
aaa authentication enable default enable
line console
enable authentication default
I did the configurations via a serial port connection. After a while, I got logged out from the privileged mode. And now it expects a password. What is this password? Is there a default one?
Thanks for help!
0 events found
No Events found!
xwen
3 Posts
0
July 28th, 2016 09:00
My end goal was to allow telnet connection to enter privileged mode. But I always got 'Authentication Failed' error from telnet connection on 'enable' command - without being asked for password.
I will try reboot the switch. Thanks for your reply.