This post is more than 5 years old
1 Rookie
•
6 Posts
0
86399
September 10th, 2012 01:00
Backup PowerConnect 5548 Configuration
During our office's last power outage, our PowerConnect 5548 stack (3 units) lost its configuration. How would I go about backing up the stack's configuration (just in case this happens again)? As well, how would I restore the backup?
We have a single stack of 2x 5548P units and 1x 5548 unit.
Thanks.
brgn
1 Rookie
•
6 Posts
0
September 10th, 2012 14:00
Thank you Daniel - I was able to telnet into our 5548 stack and TFTP the configuration back to one of our TFTP Servers.