Unsolved
This post is more than 5 years old
3 Posts
0
29419
April 5th, 2013 10:00
Can't remove snmp-server MIB variable
When I do a show run I have the following line, I would like to remove it but cannot. I have tried putting no in front of it and looked through the web interface. Can someone tell me how to get rid of this please?
snmp-server set rlEventsDeleteEvents rlEventsDeleteEvents 1
0 events found
No Events found!
DELL-Willy M
802 Posts
1
April 5th, 2013 11:00
I'm not seeing an option in the CLI on one of the switches either. What is the specific model that you are configuring?
I will look into what options we have
itbiz_b
3 Posts
0
April 5th, 2013 12:00
OK, do you have any idea what that line is doing? I did not add it and as long as it is not a security/configuration problem I will leave it.
DELL-Willy M
802 Posts
0
April 5th, 2013 12:00
We are not seeing a direct way to remove this from the running config.
One option is to tftp the startup config to a server and modify that line (remove it). Then load the file back into the startup location. Reload the switch. Verify the running config output.
itbiz_b
3 Posts
0
April 5th, 2013 12:00
It is a PowerConnect 3548P
vt1012
212 Posts
0
April 5th, 2013 13:00
I was going to suggest the same thing that Willy said, that is to tftp a backup and remove it manually. also make sure you have the latest 2.0.0.51 firmware for the 35xx. It is located here: www.dell.com/.../powerconnect-3548p
It looks like a missing command in the CLI, but it is possible you may also be able to access and remove it using a web session or snmp app (like OMNM).
B