Current firmware for 3024?

Question

I'm looking for the current 'stable' version of the firmware for the 3024.  Can anyone point me to the file?  For some reason I can't seem to find it  (6.1.4 or 6.1.5) on Dell's site.   Thanks,   Barry

GregM_1 · Answer

6.1.4 is the latest public release, but 6.1.5 is what I recommend.  You can get to 6.1.4 through the Network Drivers section instead of Firmware.   Also, check your email.

hckrphil · Answer

Where can I find 6.1.5 for the Dell PowerConnect 3024?  Thanks! ~Phil

hckrphil · Answer

Any major difference between the public 6.1.4 release and the super top secret 6.1.5?  Thanks.  :smileytongue:   ~Phil

GregM_1 · Answer

You have to get it from someone in support, it is not on the web. In your case, check your email :)

skyking60 · Answer

I'd be needing the super top secret 6.1.5, of you could mail it to me:)

Ranger73 · Answer

I'd like to jump on the 6.1.5 bandwagon, as well.  Thank you.

DIVIDEDSPACE · Answer

I'd like to use the 6.1.5 firmware. Is this still the newest?

gsgleason · Answer

Please email me the 6.1.5 firmware as well. Do I need to update the boot ROM version as well as the software version?

GregM_1 · Answer

Firmware has been emailed =)   I recommend you default the switch after going to 6.1.5 and re-do your config.  Also, this is just a software upgrade, the Boot ROM is fine and will stay the same.

ilaidlaw · Answer

Is it still possible to get the 6.1.5 version of the firmware? Thanks!

ad_vlad · Answer

Hi,  I badly need the firmware 6.1.5 for the PowerConnect 3024 switches.  I got 2 of them in a stack and they are hanging up badly with the 6.1.2 firmware. I can't pin it down nowere and the only thing that is spamming my console is : 'sif_pkt_alloc: dblk allocate failed'.  I'm from Eastern Europe and the support here has closed at this hour. Can someone please help me tonight (my time).

dhquebbeman · Answer

Hi Greg,   We were about to toss out 5 3024s, due to hanging issues, all of them at 6.1.2.3921. I would really like to try this 6.1.5 firmware, or newer if one ever came out.   Thanks in advance, -doug quebbeman senior systems administrator the estopinal group

newmediallc · Answer

Moderator - sorry, this is a duplicate post, you can remove it. Real post is below.   Thanks!   Ed LaFrance Message Edited by newmediallc on 03-03-2007 06:54 PM

newmediallc · Answer

Hello - I would also like to be emailed the 6.1.5 firmware - having a locking issue with a 3024 running the 6.1.2 firmware (switch stops responding, lights all flash rapidly) and I've read here that the upgrade could solve the problem. Please email it to me. One question: will the switch lose it's IP setting when I upgrade? It is in a remote location, and if it will, I will have to take that into consideration.   Thanks!   Ed

BigBen2k · Answer

Hi! I'd also like to get the latest firmware for my 3024. I'm running 6.1.2 , I can't find 6.1.4 anywhere even after extensive searches, and certainly wouldn't mind getting a hold of 6.1.5 ! Please advise, Ben

Networking General

Was this post helpful?