Unsolved
This post is more than 5 years old
1 Rookie
•
1 Message
0
578848
February 3rd, 2010 03:00
DELL PowerConnect 6224
Hi,
My company bought 4 powerconnect 6224 and 8 powerconnect 2724 switches. I can WEB access or telnet to 2724 easy with default username: admin and blanco password, but I cant connect to any of 6224 switches neither via WEB or telnet. Always says "Username or Password invalid". I cant find solution anywhere on Internet so plz help me so I can configure my equipement asap.
Tnx in advanced,
Bojan
No Events found!
bh1633
909 Posts
0
February 3rd, 2010 06:00
6224 does not have a default username and password. You need to connect to the serial port and set one. the following example sets the username/password to admin/mypassword with privilege level 15. Level 15 is what is needed to access via the web.
console> enable
console# configure
console(config)# username admin password mypassword level 15
You may also need to set the IP address to something on your network: The following example sets the IP address to 10.10.10.1 with a netmask of 255.255.255.0.
console (config)# ip address 10.10.10.1 /24