Unsolved
This post is more than 5 years old
1 Rookie
•
93 Posts
0
47033
September 3rd, 2013 18:00
Firmware Update On PowerConnect 2808?
I have a PowerConnect 2808 switch that is in Managed Mode. I can connect to it through the we interface as well as through telnet but I'm just not clear how to flash the switch with the new firmware. It currently has:
| Software Version | 1.0.0.44 | |
| Boot Version | 1.0.0.13 | |
| Hardware Version | 00.00.03 |
I've downloaded the latest release (PowerConnect,2800,V1.0.0.45,A07) from the Dell web site and after extracting the files I attempted to put the file powerconnect_28xx-10045.ros on the switch using the web interface. It says the file uploaded without errors. I reboot the switch but the software verson is still at 1.0.0.44. I've read the instructions on using a TFTP server but I don't have access to one on my network and would like to know if it is possible to do the update using the web interface.
Thanks
Jeff
0 events found
jteel
1 Rookie
•
93 Posts
0
September 4th, 2013 13:00
Thanks for the reply Daniel. I downloaded the image again and went through the same steps that I described in my origional post. After re-booting the switches they are now showing the 10045 firmware now. Thanks for your input!
Jeff