help with VLAN PowerConnect 3024

Question

I've just need help with VLAN on the switch PowerConnect 3024. I just want to know if it's possible to have 2 or more VLAN on 1 port. Thank's for helping!

Jean-Yves · Answer

where Can I make that? In the page 'VLAN & CoS Tagging?' I Can use a port on a VLAN and I've to take the same port for another VLAN?

rafaelmsantos · Answer

r u connected to the switch??   you have to configure it typing on the switch's OS command line.

rafaelmsantos · Answer

Yes.   Use this: interface ethernet switchport mode general switchport general allowed vlan add , , ...   The will reach the specified VLANs.

Jean-Yves · Answer

I'm not now connected to the switch, but I can See with the CD of documentation the web interfaces or the mode console. but I know that I've to configure it on switch's OS Message Edited by Jean-Yves on 05-17-2005 09:15 AM

Jean-Yves · Answer

I've seen that there are tags in the switch. Could you please tell me if I've understood or not.

a packet com in a port, for exemple port 11, this port is a tag, for exemple 6. The packet has now a tag N°6. Then the switch see if VLAN ID N°6 is known or not, and if it's known, the packet is transmitted by the port this VLAN (N°6) has right.

rafaelmsantos · Answer

You can have more than one VLAN for one PORT.   But to work, thw switchport mode can not be the same you have in a one VLAN PORT.   Read the message id 3381 (change in your browser's address bar).

Jean-Yves · Answer

there is nothing in those messages. It's deal with firmware. And could you please telle me if it's true or false what i'm thinking about tags

gsgleason · Answer

I believe the 3024 doesn't have a CLI. it has a menu driver console interface.

Networking General

help with VLAN PowerConnect 3024

Was this post helpful?