Unsolved

This post is more than 5 years old

11 Posts

4027

March 6th, 2019 06:00

Issues with LLDP and errors in the log

Mar 4 12:58:05.824 Eastern %STKUNIT1-M:CP %LLDP-3-EXT_POW_MDI: Configuration mismatch with neighbor on interface Gi 2/11 Greetings Our network consists of approx 18 3148 switches with a few 4148 in Layer 2 mode I have checked the switch and as far as I can tell , LLDP is set up correctly but I continue to receive these errors on a lot of ports in multiple switch stacks !. PVST enabled Spanning Tree enabled On all ports and vlans it seems to be set up interface GigabitEthernet 2/14 no ip address portmode hybrid switchport speed 1000 spanning-tree pvst edge-port bpduguard service-policy input VOICE_TO_QUEUE_2_POLICY_MAP power inline no shutdown ITSW1(conf-lldp)#show conf ! protocol lldp advertise dot1-tlv port-vlan-id advertise dot3-tlv max-frame-size advertise management-tlv management-address system-capabilities system-description system-name advertise interface-port-desc ITSW1(conf-lldp)# Any help would be appreciated ! Thx

Moderator

 • 

9.6K Posts

 • 

42.2K Points

March 6th, 2019 09:00

Hi,

Is the firmware up to date on the switch stacks? Besides getting the error is LLDP working?

11 Posts

March 8th, 2019 10:00

Hi Josh Yes they are up to date as in latest code ! Dell EMC Application Software Version: 9.14(0.2) The 4148's are upgraded to the latest too . 10 . I do not have the code handy Yes LLDP is running now and seems to be working correctly also ! Just the errors in the logs

Moderator

 • 

9.6K Posts

 • 

42.2K Points

March 8th, 2019 11:00

Can you private message me the service tags of the switches?

11 Posts

April 2nd, 2019 07:00

Just sent you a private message Josh 

 

Thx 

 

Regards


Rich 

11 Posts

April 2nd, 2019 07:00

Hi Josh

Apologies as I missed your msg !

How do I private msg you ?

 

Regards

 

Rich

No Events found!

Top