LACP port inactive

Question

frontend switches are connected with backend switches with 10Gbe copper twinax direct attach cable and configured port-channel 1 for VLAN 332, 332, 337 we faced an unusual problem, port channel 1 got itself down & we lost connectivity for few networks. We fixed it and restored the network connectivity problem but still showing detach status under Link State on port Te1/0/46 (Frontend Switch).

DELL-Josh Cr · Answer

Hi, Which switch and firmware version are you using?

liyabru · Answer

switch and firmware version are N4064F, 6.2.7.2, Linux 3.7.10-449339c5

liyabru · Answer

any update? Please advice me   Thanks

DELL-Josh Cr · Answer

Try updating the firmware https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=r16f0&oscode=naa&productcode=networking-n4000-series

There were some fixes for ports not working properly after being removed from a port channel.

CVeiga · Answer

Hello,  I have the same problem, Port-channel inactive ports, and my switch is model N2048 and image N2000Stdv6.7.1.8.

Networking General

Was this post helpful?