Browse Community
Help
Log In
Responses(3)
Solutions(0)
Plati1337
1 Rookie
•
15 Posts
0
December 10th, 2017 23:00
Thank you, will try to replace that cable.
January 26th, 2018 00:00
Hi again, I tried replacing the cable, but the error persisted. I then replaced the switch, but the error persisted!I have also upgraded firmware, CPLD and bootcode. Do you have any more suggestions to what I can try? It is a stack of 6 N2000 switches. (2048 and 2048P's)
moxom
21 Posts
January 29th, 2018 00:00
It might be a long shot, but you could try to connect the switch through another switch than what its currently connected to and see if the errors persist :), if they don't, it could be the switch connected to the port in question..
Dell Support Resources
View All
Top
Plati1337
1 Rookie
•
15 Posts
0
December 10th, 2017 23:00
Thank you, will try to replace that cable.
Plati1337
1 Rookie
•
15 Posts
0
January 26th, 2018 00:00
Hi again,
I tried replacing the cable, but the error persisted.
I then replaced the switch, but the error persisted!
I have also upgraded firmware, CPLD and bootcode.
Do you have any more suggestions to what I can try?
It is a stack of 6 N2000 switches. (2048 and 2048P's)
moxom
21 Posts
0
January 29th, 2018 00:00
It might be a long shot, but you could try to connect the switch through another switch than what its currently connected to and see if the errors persist :), if they don't, it could be the switch connected to the port in question..