N2048P Port Error

Question

Hi Team Dell Technical Support,Please help me troubleshoot, somethink problem in the log.<188> Dec 6 07:51:23 PEPBPNACSW_A02-1 POE[PoE Req]: hpc_poe_pwrdsne.c(4474) 131200 %% WARN Please configure Power Managementmode to Class Based for 802.3at devices<188> Dec 6 07:51:23 PEPBPNACSW_A02-1 POE[PoE Req]: hpc_poe_pwrdsne.c(4474) 131199 %% WARN Please configure Power Managementmode to Class Based for 802.3at devices<188> Dec 6 07:50:59 PEPBPNACSW_A02-1 POE[PoE Req]: hpc_poe_pwrdsne.c(4474) 131198 %% WARN Please configure Power Managementmode to Class Based for 802.3at devices<188> Dec 6 07:50:58 PEPBPNACSW_A02-1 POE[PoE Req]: hpc_poe_pwrdsne.c(4474) 131197 %% WARN Please configure Power Managementmode to Class Based for 802.3at devicesThis port connected to ip phone device, ip phone is not running normalyAccess_Switch_A02#show running-config interface gi1/0/48spanning-tree portfastswitchport access vlan 98 ==> Vlan Managementswitchport voice vlan 100 ==> Vlan VoiceMachine Description............... Dell EMC Networking SwitchSystem Model ID................... N2048PMachine Type...................... Dell EMC Networking N2048PSerial Number..................... CN0WYWXP2829878V0244A01Manufacturer...................... 0xbc00Burned In MAC Address............. E4F0.0433.4FCASystem Object ID.................. 1.3.6.1.4.1.674.10895.3056SOC Version....................... BCM56340_A0HW Version........................ 5CPLD Version...................... 20Image File........................ N2000Stdv6.5.2.15Software Capability............... Stack Limit = 12, VLAN Limit = 4093unit active backup current-active next-active---- ----------- ----------- -------------- --------------1 6.5.2.15 6.5.1.6 6.5.2.15 6.5.2.15Thanks

DELL-Josh Cr · Answer

Hi,

Try setting the power mode, page 83 https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/networking-n2000-series_user%27s-guide10_en-us.pdf it could also be an issue with the ip phone.

Networking General

Was this post helpful?