Unsolved
2 Posts
0
573
October 21st, 2021 15:00
N3024 with HSRP uplink from ISP
We have two uplinks in an HSRP configuration from our ISP. We currently have both connections going into a single Cisco 3560 switch with Access VLANs configured on both of the uplink ports and a port for our firewall. When trying to move the ISP uplinks to our N3024 fabrics there was no link light at all.
We have two separate N3024 fabrics that we would like to use for redundancy. The idea is to plug each uplink into one of the N3024 fabrics and then the firewalls into each of the fabrics for redundancy.
Why would the uplinks not provide a link at all when plugged into the N3024 fabrics?
Can I plug the HSRP uplinks into the N3024 fabrics?
Thank you!
No Events found!
DELL-Young E
Moderator
•
5.4K Posts
•
37 Points
0
October 21st, 2021 22:00
Hi, thanks for choosing Dell. I hope these article and the old post come helpful.
https://dell.to/3jljwXl
How to Configure Virtual Router Redundancy Protocol (VRRP) on Dell Networking PowerConnect switches | Dell US
https://dell.to/3jsi3P4
Configuring N3024 Switch as Redundant