NTP on Dell S5048F (UTC Problem)

Question

Hello Friends we have recently purchesd 2 S5048F switches - they run 9.14.00 firmware i have configured ntp sucsessfuly but UTC is 2 hours back i have set the clock time zone to UTC 2 (to add 2 more hours ) but it dosent seem to do anything ... sh clock - shows the correct time sh ntp status - shows ntp server synchronized but behind in time (2 hours ) did anyone face this problem ? is it in the bios or somthing ? help will be greatly appreciated

DELL-Josh Cr · Answer

Hi,

Have you rebooted the switch since making the change? Try setting the daylight savings time settings and see if that fixes it, page 916 https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/networking-s5048f-on_administrator-guide3_en-us.pdf

Knightx · Answer

Hi josh

Yes I have rebooted many times but still same

I have configured daytime settings as you suggested but it only effects the switch clock not ntp

Ntp stays in UTC and dosent add +2

It only happens with ntp as the switch clock works good

Any advise josh ??

DELL-Josh Cr · Answer

Can you private message me the service tag?

Networking General

NTP on Dell S5048F (UTC Problem)

Was this post helpful?