Unsolved
This post is more than 5 years old
4 Posts
0
5422
August 5th, 2004 08:00
PC3348 and Multi-VLANs
All,
I have recently been requested to configure a PC3348 to use Multi VLANs in a shared office network.
They have a a shared internet connection that they all want to see, but do not want traffic passing from office to office.
On previous versions of the PC3xxx I could allocate a navite VLAN to a port but than explicitly allow traffic from other VLAN to access the Multi-VLAN ports as required.
For example the LAN of the firewall was connect to ethernet1 which is in VLAN 1 and all VLANs could access that VLAN and it could access all other VLAN. VLANs 2 & 3 which where individual iffices could not communicate with each other.
Can anyone help?
Cheers
Mark
No Events found!
GregG1
2 Intern
•
812 Posts
0
August 5th, 2004 11:00
The feature you would need to use to accomplish this goal is referred to as "port overlapping".
Please see the following threads for information on port overlapping:
http://forums.us.dell.com/supportforums/board/message?board.id=pc_managed&message.id=1552
http://forums.us.dell.com/supportforums/board/message?board.id=pc_managed&message.id=1312
http://forums.us.dell.com/supportforums/board/message?board.id=pc_managed&message.id=1309
On the 3324, you would use the "general" mode to untag multiple VLANs on the same port