Unsolved
This post is more than 5 years old
4 Posts
0
28316
April 4th, 2013 09:00
PC7048R-RA bind mac to vlan
I cannot make my switch to use bind-mac-to-vlan. My actions:
1) create VLAN in Switching-VLAN-VLAN membership in web-interface
2) create "Bind MAC to VLAN" in Switching-VLAN-"Bind MAC to VLAN" in web-interface
3) I am trying to ping betweeng notebooks connected to switch
4) fail
Can anyone provide the right way to configure this feature?
No Events found!
dmpopoff
4 Posts
0
April 4th, 2013 23:00
Notebooks are in same vlan with id 3333
console#show vlan
VLAN Name Ports Type
----- --------------- ------------- --------------
1 default Po1-128, Default
Gi1/0/1-48
3333 test Static
console#show vlan association mac
MAC Address VLAN ID
----------------- -------
5404.A63B.5564 3333
6805.CA0A.8E61 3333
E0CB.4E98.40DF 3333
Notebooks are with static IP and in same subnet
Notebooks cannot ping each other. Notebook ports on switch are active.
console#show interfaces status
Port Description Duplex Speed Neg Link Flow Control
State Status
--------- ------------------------- ------ ------- ---- ------ ------------
Gi1/0/1 N/A Unknown Auto Down Inactive
Gi1/0/2 N/A Unknown Auto Down Inactive
...
Gi1/0/19 Full 1000 Auto Up Active
Gi1/0/29 Full 1000 Auto Up Active
Gi1/0/30 N/A Unknown Auto Down Inactive
...
But MACs of devices does not present in switch mac address table
show mac address-table
Aging time is 300 Sec
Vlan Mac Address Type Port
-------- --------------------- ----------- ---------------------
1 5C26.0AD1.0E65 Management Vl1
Total MAC Addresses in use: 1
dmpopoff
4 Posts
0
April 5th, 2013 09:00
lets clarify: I should remove mac association before add static binding interfaces to vlans?
dmpopoff
4 Posts
0
April 5th, 2013 09:00
thank you for advice! I can do it at monday only(( now switch is far away from me)) After test I`l describe the situation