Browse Community
Help
Log In
Responses(4)
Solutions(1)
Mic77
9 Posts
0
May 24th, 2019 23:00
Just setting the port mode hybrid and vlan stack command made it work. Thanks
DELL-Josh Cr
Moderator
•
9.5K Posts
May 20th, 2019 09:00
Hi,
How is the port configured? What is the other switch? Does it support VLANs?
May 20th, 2019 15:00
Do I need to do something like this ?
<ADMIN NOTE: Broken link has been removed from this post by Dell>
I tried above but no success...
At the moment, I have the port switch has not special configuration. ping works ok but not from vlan i/f
interface TenGigabitEthernet 1/10/1no ip addressmtu 9416switchportno shutdown
from monitoring i.e. monitor interface ten.. 1/10/1, I can see that output packets is incrementing. So perhaps
other switch is not not compatible. But since port is untagged, is it taking something from packet?
If you could clarify how this should really work. Should the packet be fine with this basic config do i need to go
and make a portmode hybrid...and vlan i/f
May 22nd, 2019 08:00
Try that configuration that you linked and see if it works.
Dell Support Resources
View All
Top
Mic77
9 Posts
0
May 24th, 2019 23:00
Just setting the port mode hybrid and vlan stack command made it work. Thanks
DELL-Josh Cr
Moderator
•
9.5K Posts
0
May 20th, 2019 09:00
Hi,
How is the port configured? What is the other switch? Does it support VLANs?
Mic77
9 Posts
0
May 20th, 2019 15:00
Do I need to do something like this ?
<ADMIN NOTE: Broken link has been removed from this post by Dell>
I tried above but no success...
At the moment, I have the port switch has not special configuration. ping works ok but not from vlan i/f
interface TenGigabitEthernet 1/10/1
no ip address
mtu 9416
switchport
no shutdown
from monitoring i.e. monitor interface ten.. 1/10/1, I can see that output packets is incrementing. So perhaps
other switch is not not compatible. But since port is untagged, is it taking something from packet?
If you could clarify how this should really work. Should the packet be fine with this basic config do i need to go
and make a portmode hybrid...and vlan i/f
DELL-Josh Cr
Moderator
•
9.5K Posts
0
May 22nd, 2019 08:00
Try that configuration that you linked and see if it works.