POE issue Powerconnect 7024P

Hi Guys,

I am trying to POE a Cisco 3602i AP with the Cisco AIR-RM3000AC module. No matter what I tried AP is reporting medium power and not powering up the AC module.

CISCO WLC

SWITCH Config

#################### PORT CONFIG ####################

interface Gi1/0/24
storm-control broadcast level 40
storm-control multicast level 40
description "CiscoAP"
spanning-tree portfast
switchport mode trunk
switchport trunk native vlan 10
switchport trunk allowed vlan 10,30,40,50
power inline detection dot3af+legacy
power inline high-power
power inline limit class
power inline priority critical

#################### show power inline gigabitethernet 1/0/24 ####################

Port Powered Device State Priority Status Class Power[mW]
--------- ------------------------ ----- -------- ---------- ------- ---------
Gi1/0/24 auto Critical On Class4 6900

Overload Counter............................... 0
Short Counter ................................. 0
Denied Counter................................. 0
Absent Counter................................. 0
Invalid Signature Counter...................... 0
Output Volts................................... 54
Output Current................................. 129
Temperature.................................... 30

#################### show version ####################

System Description................ Dell Ethernet Switch
System Up Time.................... 1 days, 16h:29m:57s
System Contact....................
System Name....................... switchone
System Location...................
Burned In MAC Address............. F8B1.561F.E2F1
System Object ID.................. 1.3.6.1.4.1.674.10895.3036
System Model ID................... PCT7024P
Machine Type...................... PowerConnect 7024P

unit image1 image2 current-active next-active
---- ----------- ----------- -------------- --------------
1 5.1.15.2 5.1.16.1 image2 image2

#################### show power inline firmware-version ####################

Unit Firmware Version
---- ----------------
1 4.0.1.2

 

 Any help will be appreciated. 

Thank You