Power connect 5324 Web Gui default password ?

Question

Hi all,   i just have received a new Power connect 5324 (it's my first one...) and i created a DHCP/BOOTP reservation in order to assign it a specific ip address then i switched it on.   now, i can reach the Web gui using http://ipaddressofswitch but i can't find what password i shoul insert for the 'enable domain'...   I read the documentation and it says : admin/admin or guest/guest but both don't work here..   thanks   Florent

fgilain · Answer

Oupss...ok, thanks, i'll try it   Florent

GregG1 · Answer

The 5324 (like the 3300, 3400, and 6024) has no default user account. To manage the switch via the network, you must first connect to the local console and create a local user with level 15 access.   (config)# username password level 15

fgilain · Answer

Greg,   I just have connected to port COM1 on the switch, but it tells me Unrecognized command (the prompt isn't 'config' but 'console' for me)   Thanks for your help, i'm really a newbee with this kind of product  ;-((   Florent

GregG1 · Answer

When connecting to the console, you will be presented with a user Exec mode prompt:   console>   To enter Privileged mode, you must use the 'enable' command:   console#   From Privileged mode, you enter global configuration mode using the 'configure' command:   console(config)#   For more information on using the CLI, see the following link to the online CLI Guide: < ADMIN NOTE: Broken link has been removed from this post by Dell>

Networking General

Power connect 5324 Web Gui default password ?

Was this post helpful?