This post is more than 5 years old
5 Posts
0
78729
August 12th, 2014 18:00
Powerconnect 2824 Can't get into web interface
My company bought a powerconnect 2824, anyway this is 1st time i configure Dell switch. I managed to setup initial configuration using cli mode, but after anyway I can't config interface only able to show information and also can't get into web interface with default setting or after setting.
What i did wrong?
No Events found!
yuuna
5 Posts
0
August 14th, 2014 07:00
Thanks for yr reply,
Yes. Switch is in managed mode but i only can enter cli mode. when i open 192.168.2.1 at web browser, it showed no internet access. And i noticed interface port 1 didnt up also.
What i missed?
What i can do now? This switch is quite urgent to configure...Anyone can please provide a guideline or solution for me?
yuuna
5 Posts
0
August 16th, 2014 07:00
DELL-Daniel C ,
The switch was in default setting, i was used chrome and IE browser to open.
yuuna
5 Posts
0
August 17th, 2014 05:00
DELL-Daniel C ,
Can u provide me a guideline or solution on this? Till now i cant enter web mode.
yuuna
5 Posts
0
August 20th, 2014 20:00
DELL-Daniel C ,
You may close this post.
Talso235
5 Posts
0
September 4th, 2019 13:00
https://www.dell.com/community/Networking-General/PC-6248-management-interface-HTTPS-SSH-problem/td-p/3916620
console(config)#ip https server