PowerConnect 5448 HTTP/HTTPS web interface - cant get it to load

Question

HI Everyone, I've spent sometime googling and trying lots of different things. I cant get the web interface to load on a Dell PowerConnect 5448 on either HTTP or HTTPS.I am able to telnet and ssh to the switch just fine. console# show running spanning-tree mode rstp interface range ethernet all spanning-tree portfast exit port jumbo-frame voice vlan oui-table add 0001e3 Siemens_AG_phone________ voice vlan oui-table add 00036b Cisco_phone_____________ voice vlan oui-table add 00096e Avaya___________________ voice vlan oui-table add 000fe2 H3C_Aolynk______________ voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone voice vlan oui-table add 00d01e Pingtel_phone___________ voice vlan oui-table add 00e075 Polycom/Veritel_phone___ voice vlan oui-table add 00e0bb 3Com_phone______________ iscsi target port 860 address 0.0.0.0 iscsi target port 3260 address 0.0.0.0 iscsi target port 9876 address 0.0.0.0 iscsi target port 20002 address 0.0.0.0 iscsi target port 20003 address 0.0.0.0 iscsi target port 25555 address 0.0.0.0 interface vlan 1 ip address ********* 255.255.254.0 exit ip default-gateway ********* username ********* password ********* level 15 encrypted ip ssh server snmp-server community *******ro view Default ip https server clock source sntp sntp unicast client enable sntp unicast client poll sntp anycast client enable sntp broadcast client enable sntp server 108.61.73.244 poll sntp server 130.88.209.49 poll Default settings: Service tag: SW version 2.0.0.46 (date 14-Apr-2011 time 13:10:53) Gigabit Ethernet Ports ============================= no shutdown speed 1000 duplex full negotiation flow-control off mdix auto no back-pressure interface vlan 1 interface port-channel 1 - 8 spanning-tree spanning-tree mode STP qos basic qos trust cos I cant get anything to load on either HTTP or HTTPS, https thinks about it for a few seconds before browser 'cant reach this page' I've also made sure http/https ports are not none standard for example: console# show ip http HTTP server enabled. Port: 80 console# show ip https HTTPS server enabled. Port: 443 Certificate 1 is active. Issued by : C= , ST= , L= , CN=xxxx, O= , OU= Valid From: Aug 21 10:04:41 2020 GMT Valid to: Aug 21 10:04:41 2021 GMT Subject: C= , ST= , L= , CN=xxxxx, O= , OU= SHA1 Fingerprint: E1677E9F AD1A892F E8411142 F2430828 CF8F1A45 Certificate 2 does not exist. I have configured other dell switches in the past and it just worked but this Powerconnect 5448 seems to be difficult, from the config it looks enabled yet it doesn't work and behaving like a firewall is blocking the port (no firewall in front of it). I hope someone can help me.

Dell-DylanJ · Answer

It looks to me like you've got it set up correctly. You might consider taking a laptop to the switch and manually assigning it an IP on the same subnet to make sure that the web UI is actually functional. If it isn't flashing the firmware may help.

Networking General

Was this post helpful?