Unsolved
This post is more than 5 years old
20 Posts
0
3403
July 19th, 2004 17:00
Powerconnect 6024 question
I need to have 2 ports on a flat network (not switched). We have a web content filter that works like a sniffer. To work the two ports must see all traffic on both ports. Short of adding a concentrator, can I, and if so, how can I make the switch do this?
Message Edited by bbazian on 07-19-2004 02:49 PM
0 events found
No Events found!
GregG1
2 Intern
•
812 Posts
0
July 20th, 2004 11:00
The PowerConnect 6024 has Port Monitor feature. You can configure traffic from multiple ports (Source ports) to be mirrored to a Destination port. However, the switch is limited to a single Destination port. See the following link to the online CLI Guide for the CLI commands:
http://support.dell.com/support/edocs/network/pc6024/en/clig/portmoni.htm#1016148