PowerConnect 6248 configuration question

Question

Hey Guys I'm setting a test networking inside my real network and need to figure out how to setup this 6248P switch.  Currently I have an existing DHCP server on, 10.0.0.64, which server my entire network, I have that DHCP server coming in on Port 47, and Ports 13-47 are in VLAN-1. I have ports 1-12 setup in a VLAN-2.  What I want to do is to forward the DHCP traffic into VLAN 2, giving any computers connected to that section internet access, but not allow DHCP traffic out, because I'll be running a DHCP Server in VLAN-2.  What is the right way to preform this kind of configuration?

DELL-Josh Cr · Answer

Hi,

The easiest way to block access is with an Access control list and just have it deny traffic from the ip of the dhcp server on those ports. P210 http://downloads.dell.com/Manuals/Common/powerconnect-6224_Reference%20Guide_en-us.pdf

Networking General

Was this post helpful?