Yes it's the same thing, really driving me crazy...

Please find the version:

SAASPC7048#show tech-support

***************** Show Version ******************

Switch: 1

System Description............................. PowerConnect 7048, 5.1.1.7,
VxWorks 6.6
Machine Description............................ Dell Ethernet Switch
Machine Type................................... PowerConnect 7048
Machine Model.................................. PCT7048
Serial Number.................................. CN051893282984250007A14
FRU Number.....................................
Part Number.................................... BCM56634
Maintenance Level.............................. A
Manufacturer................................... 0xbc00
Burned In MAC Address.......................... F7B1.562E.75C2
Software Version............................... 5.1.1.7
Operating System............................... VxWorks 6.6
Network Processing Device...................... BCM56634_B0
Additional Packages............................ FASTPATH QOS
FASTPATH Multicast
FASTPATH Stacking
FASTPATH Routing

Thanks for this tip, i'll try to upgrade the firmware and hope that it'll solve this issue.

Just one question, the to PC7048 are stacked, so.. in case of upgrade does the 2 switches need to restart after the upgrade ? or does the master will upgrade itself and then copy the firmware to the second one ?

It's a production environnement and it's difficult to have downtine allowed.

Thanks,

Hi,

I only had the following:

username "admin" password 7c45619f40cpoik73cc3490568877cf03 privilege 15 encrypted
username "rancid" password 1b430poc9deb13487f016d09e7c66fce privilege 15 encrypted
ip ssh server

enable password 7c45619f40cb6d73cc3490568877cf03 encrypted--->no enable password

I hope that the firmware upgrade will solve this issue