PowerConnect M8024-k RAM overload

Hello

Over 30% of your memory is available, I don't see a memory issue. I skimmed the release notes, and I don't see anything that would change your memory usage. You can find the release in the package that includes the firmware update.

Thanks

---

@DELL-Daniel My wrote:

Hello

Over 30% of your memory is available, I don't see a memory issue. I skimmed the release notes, and I don't see anything that would change your memory usage. You can find the release in the package that includes the firmware update.

Thanks

---

Sorry for wrong attachment it was other switch. the real one is :

I suggest that you check the show run to make sure something else is not configured/enabled. I would look specifically for debugging or any additional logging features that may be enabled.

HI everyone, I have PowerConnect M8024-k its RAM is full:

just have one vlan and only 7 ports are connected 1GB ports full duplex.

unit image1      image2      current-active next-active
---- ----------- ----------- -------------- --------------
1    5.1.11.1    5.1.1.7     image1         image1
2    5.1.11.1    5.1.1.7     image1         image1

What do you think Update of firmware can help it or not?

https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=nw84x

Can you advice me few debugging or any additional logging features? or what can make so much load?