Simone Barucco,

Just a thought, did you happen to run the redistribute connected command, after connecting? 

Simone Barucco,

Would you confirm if this is the initial configuration of the switch, as you will likely need to call in for assistance. If not then I would say we definitly need additional information, such as the results of show vrrp as well as the results of show tech-support. You can upload the results on upload. dell. com, then private message me the svc tag used to upload, so I can locate the logs. I can then review them for you to see if I can spot anything.

Let me know.

Hello Simone Barucco,

Can I clarify this is a new configuration since things have change from initial configuration?

Could you log the output of this command:

console#show tech-support

Then upload here, https://upload.dell.com/,  under the service tag of the switch and Private Message Chris and myself  the service tag so that it can be retrieved for review.

show vrrp vrf Trasporto_Core brief
Interface Group Priority Prempt State Version Master addr(s) Virtual addr

vlan3048 IPv4 140 100 false master-state 3 10.128.254.5 10.128.254.4

vlan3950 IPv4 151 100 false master-state 3 10.212.0.2 10.212.0.1

Hi,
in this configuration i am using only static routes

I actually found that the traffic works in one direction now, whereas before it stopped at the switch.

Traceroute from IP 10.128.0.15 (Windows Machine) to 10.240.8.100
Tracing route to 10.240.8.100 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 10.128.0.241
2 4 ms 4 ms 4 ms 10.128.254.5 (Dell - vlan 3048)
3 5 ms 5 ms 4 ms 10.212.0.5
4 6 ms 3 ms 3 ms 1.0.236.237
5 3 ms 3 ms 5 ms 10.240.8.100

Trace complete.

Traceroute from IP 10.240.8.100 (Linux Machine) to 10.128.0.15
traceroute to 10.128.0.15 (10.128.0.15), 30 hops max, 60 byte packets
1 10.240.8.65 (10.240.8.65) 0.227 ms 0.216 ms 0.204 ms
2 node-lhu.pool-1-0.dynamic.totinternet.net (1.0.236.210) 16.685 ms 16.708 m s 16.700 ms
3 10.212.0.3 (10.212.0.3) 14.206 ms 14.260 ms 14.063 ms  (Dell - vlan 3950)
4 * * *
5 * * *
6 * * *

Simone,

After reviewing the logs I am not seeing anything standing out. What I would suggest, based on your warranty, is to call in to support so they can directly analyze the issue with you.