Unsolved
This post is more than 5 years old
62 Posts
0
7695
March 24th, 2005 19:00
Traceroute and Telnets
One of the main things I would like to see the 6024's and 3348 switches do is a telnet and traceroute from the command lines. There have been times It would have been much easier to do a telnet from a local switch to another device on the network and am unable to do so. Likewise, troubleshooting would be MUCH EASIER if one could do a traceroute from a router. All the cisco routers and switches I have worked with in the past have this capability. In the next upgrade could we get this functionality.
No Events found!
GregG1
2 Intern
•
812 Posts
0
March 25th, 2005 10:00
The next firmware release for the 6024 implements both of these functions as well as many other feature enhancements. The current (tentative) ETA for the firmware release is mid-April.
To be informed about the firmware release, please sign up for our filewatch at the following link:
<ADMIN NOTE: Broken link has been removed / replaced from this post by Dell>
There are no plans for any feature enhancements for the 3300 series switches.
Message Edited by DELL-GregG on 03-25-2005 06:43 AM