Unsolved
This post is more than 5 years old
17 Posts
0
2306
February 22nd, 2018 14:00
U691D and 6224
Will 2xU691D modules provide 4x10Gbe for endpoint use in a 6224? Or are they just for stacking?
I've searched through these boards, and others around the 'net, but I can't find a definitive answer to this.
Thanks!
No Events found!
jcdick1
17 Posts
0
February 23rd, 2018 06:00
The built-in 10Gbe ports are currently set to "ethernet," so could they also be used for host connectivity? I currently have a host fibered in, but get no link. I will only ever have three hosts connected at 10Gbe in a very low budget, non-production environment.
jcdick1
17 Posts
0
February 23rd, 2018 07:00
I have 10 Gbe SFP+ modules in the switch, and - while it might be a less-than-recommended way of testing - connecting a fiber between xg1 and xg2 gets a link.
Edit: There is no copper in 21-24. Just one fiber in xg1, currently.
jcdick1
17 Posts
0
February 23rd, 2018 07:00
Wait, so the "uplink" fiber ports are only 1Gb? That is not what I was told. Well how 'bout that ...