This post is more than 5 years old
15 Posts
0
41624
June 14th, 2012 13:00
Unable to ping servers
Hello
I am using dell powerconnect 5524. I am able to ping servers which are connect to ports 1 to 15 from switch but unable to ping from my PC(outside switch). I configured management switch IP to VLAN 1 and configured route . All my servers IP's are in same subnet.
10.x.x.128 /26 VLAN 1
VLAN 1 connect to all ports untagged. Ports are enabled.
| # | Destination IP Prefix | Prefix Length | Next Hop | Route Type | Route Owner | Metric | Remove Select All |
||
| 1 | 10.x.x.128 | /26 | Local | ||||||
| 2 | 0.0.0.0 | /0 | 10.x.x.129 | Remote | Static | 1 |
Could you please let me know why I am unable to ping servers outside switch. Do I need to add something in the routing?
Thanks
No Events found!
strikeforce
15 Posts
0
June 14th, 2012 13:00
Select All
strikeforce
15 Posts
0
June 14th, 2012 14:00
My servers in the datacenter are connected to the switch. My PC ie from my home I don't have access to these servers. I cannot connect to these servers. I can connect to switch using GUI or CLI. Using CLI I can ping to each server from CLI. When I ping from outside the switch it is not working.
I did not tested to communicate from server 1 to server 2 and etc as I don't have access I did not performed the action.
Thanks
strikeforce
15 Posts
0
June 14th, 2012 16:00
1 Attachment
powerconnect5524.txt
strikeforce
15 Posts
0
June 17th, 2012 06:00
Thanks for your valuable answers. I found the problem. By mistake gateway IP is assigned to the server connected to switch.