This post is more than 5 years old
4 Posts
0
60216
November 9th, 2012 15:00
VLAN setup on 2816 powerconnect
Hello Everybody,
1st time using this switch and it's got me at wits end. I have 3 vlans setup that I don't want talking to each other. I have vlan 2 marked as internet with the router and a dhcp server connected on ports12-16. I have 2 ports set for vlan3 which is really for pxe and virtual machine configuration between 2 servers (with a seperate dhcp server) and VLAN 4 is 8 ports for storage network all static no dhcp.
When I connect to the router via wireless I am getting a dhcp address from vlan 3 instead of vlan 2.
I have tagged ports 12-16 for vlan2 and by tagged I mean they are tagged with a "U" and on the ports they are marked with pvid 2 frame type "admit all" and Ingress filtering on. Vlan 3 has 9 & 11 same setup for all and vlan 4 has 1-8, vlan 1 has port 10 open for configure the switch.
Any ideas where I am going wrong with this config?
DataCentric
4 Posts
1
November 13th, 2012 10:00
Nevermind people, turns out I had the wrong cable in the wrong port....nothing to see here.
DELL-Willy M
802 Posts
0
November 9th, 2012 15:00
What is the output on the VLAN port Table?
Displaying the VLAN Port Table
1 Open the VLAN Port Settings page.
2 Click Show All.
The VLAN Port Table opens.
How is you wireless router connected? What port?
Page 126 discusses the port definitions for tagged and untagged.
support.dell.com/.../gsg_row.zip
T The interface is a member of a VLAN. All packets forwarded by the interface are tagged. The
packets contain VLAN information.
U The interface is a VLAN member. Packets forwarded by the interface are untagged.
F The interface is denied membership to a VLAN.
Blank The interface is not a VLAN member. Packets associated with the interface are not
forwarded.
Hope this helps,
Keep us updated if you can.
DataCentric
4 Posts
0
November 11th, 2012 16:00
The router is on port 16 and I only want vlan 2 accessing it.
DataCentric
4 Posts
0
November 11th, 2012 16:00
Sorry also vlan 3 has a server also acting as a dhcp router that I don't want seeing any other network.
DELL-Willy M
802 Posts
1
November 13th, 2012 10:00
I'm glad to hear you have it resolved. Turns out the old saying is correct
Check cabling, check cabling, check cabling