Here is my problem...

I Have curently 1 Vlan per location that all terminate to one 8024F per location via our Fiber.  We have 4 hubs serving 28 locations and the admin office to witch all hubs trunk and including 7 other locations to the core 8024F

What we would like is to add 2 more Vlans per location that all terminate at the admin office.

Video - 2

Phone - 3  ----------all 3 go from a 3548P -- 8024F --and another 8024F Hub then to 8024F Core switch

Data - 4

We dont want the vlans at any one location to be able to see each other

is there a simple way of doing this also, I am  a little confused on what type of port modes I should be using...General, Access,  Trunk, Customer or PVE-P I or C

Any help would be much appreciated

Thks

Glenn Tataryn

Video (VLAN239) ----------------------------------------                   Fiber Connect   Gateway)     

                                                                            |--PC3548P---PC8024F----PC8024F

Phones/Data(Voice VLAN 139/Data VLAN 39)--