Unsolved
This post is more than 5 years old
7 Posts
0
6595
June 7th, 2005 00:00
VRestrict access between VLANS
I have multiple 3324's and a 6024. I have setup VLANS 2 as follows:
VLAN #10 192.168.1.0 / 24
VLAN #20 192.168.2.0 / 24
I can ping from 192.168.1.1 to 192.168.2.1 but would like to setup security that would limit access between VLANS either completly or only allow certain IP from one VLAN to access the other VLAN.
Any help would be appreciated.
No Events found!
A.Sluik
20 Posts
0
June 7th, 2005 11:00
be sure to use ports in 'access' mode for VLANs
and/or apply only one VLAN-ID, set the PVID value accordingly.
Probably you get the default VLAN ID as well, i.e. VLAN 1.
It is advised to use a flat model, see a VLAN as a label on a port,
and use only one value.