VRRP

Hello,

I want to use VRRP between 2 M8024-K

I use this:

SWITCH1

interface vlan 25

ip address 192.168.25.251255.255.255.0

interface vlan 25

vrrp 25

vrrp 25 mode

vrrp 25 ip 192.168.25.254

vrrp 25 track interface Vl25

vrrp 25 timers advertise 180

vrrp 25 accept-mode

SWITCH2

interface vlan 25

ip address 192.168.25.252 255.255.255.0

vrrp 25

vrrp 25 mode

vrrp 25 ip 192.168.25.254

vrrp 25 track interface Vl25

vrrp 25 priority 254

vrrp 25 timers advertise 180

vrrp 25 accept-mode

I can ping .251 and .252 but not .254

sh vrrp brief

Vl25          25       254      192.168.25.254     Enable    Initialize

#show vrrp 

Admin Mode..................................... Enable

Router Checksum Errors......................... 0

Router Version Errors.......................... 0

Router VRID Errors............................. 0

Vlan 25 - Group 25

Primary IP Address............................. 192.168.25.254

VMAC Address................................... 0000.5E00.0119

Authentication Type............................ None

Priority....................................... 254

Configured Priority............................ 254

Advertisement Interval (secs).................. 180

Accept Mode.................................... Enable

Pre-empt Mode.................................. Enable

Pre-empt delay................................. 0

Administrative Mode............................ Enable

State.......................................... Initialized

Timers Learn mode.............................. Disable

Description....................................

Track Interface................................ Vl25

Track Interface State.......................... Up

Track Interface Decrement Priority............. 10

No routes are tracked for this vrid and interface combination