This post is more than 5 years old
1 Rookie
•
28 Posts
0
3374
April 23rd, 2019 08:00
What's wrong with this interface range? (Invalid input)
This is driving me nuts! I can't figure out what is wrong with this range command.
field-switch(conf)#interface range gi 1/3-4, gi 2/3-4
^
% Error: Invalid input at "^" marker.
The interfaces do all exist.
field-switch(conf)#int gi 1/3 field-switch(conf-if-gi-1/3)#int gi 1/4 field-switch(conf-if-gi-1/4)#int gi 2/3 field-switch(conf-if-gi-2/3)#int gi 2/4 field-switch(conf-if-gi-2/4)#
No Events found!
DELL-Josh Cr
Moderator
•
9.4K Posts
0
April 26th, 2019 13:00
Try field-switch(conf)#interface range gi 1/3 - 1/4, gi 2/3 – 2/4
DELL-Josh Cr
Moderator
•
9.4K Posts
0
April 23rd, 2019 09:00
Hi,
Which model switch is it and what is the firmware version?
NoOneOfConsequence
1 Rookie
•
28 Posts
0
April 26th, 2019 06:00
It's an S3048-ON (actually a stacked pair), running FTOS 9.10(0.1).